Bootrom-Update Security-Check Enable; Display Boot-Loader - HP Enterprise FlexFabric 12900E Series Command Reference Manual
Hide thumbs
Also See for Enterprise FlexFabric 12900E Series:
- Installation manual (152 pages) ,
- Configuration manual (552 pages)
Table of Contents
Comware images. If you do not upgrade BootWares before upgrading Comware images, the system
automatically upgrades BootWares as necessary when loading Comware images.
The new BootWare images take effect after you reboot the card.
NOTE:
The system verifies a BootWare image before it loads that image to the Normal area of BootWare. If
the digital signature verification fails, the system will not load the image and you will receive a digital
signature verification failure message.
Examples
# Use the file a.bin in the root directory of the flash memory to upgrade the BootWare image.
This command will update the Boot ROM file on the specified board(s), Continue? [Y/N]:y
Now updating the Boot ROM, please wait................Done.
Related commands
boot-loader file
bootrom-update security-check enable
Use
bootrom-update security-check enable
Use
undo bootrom-update security-check enable
check.
Syntax
bootrom-update security-check enable
undo bootrom-update security-check enable
Default
BootWare image validity check is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Before a BootWare image upgrade starts, this feature examines the upgrade BootWare image for file
validity and incompatibility with hardware. If the BootWare image passes the check, the upgrade
process starts. If the check fails, the system does not perform the upgrade.
Examples
# Enable BootWare image validity check.
[Sysname] bootrom-update security-check enable
display boot-loader
Use
display boot-loader
to display current software images and startup software images.
183
to enable BootWare image validity check.
to disable BootWare image validity
Table of Contents
