Quit - HP Enterprise FlexFabric 12900E Series Command Reference Manual
Hide thumbs
Also See for Enterprise FlexFabric 12900E Series:
- Installation manual (152 pages) ,
- Configuration manual (552 pages)
Table of Contents
Parameters
: Specifies a hotkey. To display the supported hotkeys, enter
hotkey
: Specifies the command to be assigned to the hotkey.
command
function function
supported functions, enter
: Removes the command or function assignment for the hotkey. After you remove the
none
assignment for a hotkey, pressing the hotkey does not execute any command or function.
Usage guidelines
The device supports a set of hotkeys. Pressing a hotkey executes the command or function assigned
to the hotkey. You can configure all the hotkeys except Ctrl+].
A hotkey can correspond to only one command or function. If you assign multiple commands or
functions to the same hotkey, the most recently assigned command or function takes effect.
A command or function can be assigned to multiple hotkeys. You can use any of those hotkeys to
execute the command or function.
If a hotkey is also defined by the terminal software you are using to interact with the device, the
terminal software definition takes effect.
Examples
# Assign move_the_cursor_to_the_beginning_of_the_line function to hotkey Ctrl+U.
[Sysname] hotkey ctrl_u function move_the_cursor_to_the_beginning_of_the_line
# Disable the configurable command or function assigned to hotkey Ctrl+A.
[Sysname] hotkey ctrl_a none
Related commands
display hotkey
quit
Use
to return to the upper-level view.
quit
Syntax
quit
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Executing this command in user view disconnects you from the device.
Examples
# Return from HundredGigE 1/0/1 interface view to system view and then to user view.
[Sysname-HundredGigE1/0/1] quit
[Sysname] quit
: Specifies the function to be assigned to the hotkey. To display the
hotkey hotkey function ?
11
or see
hotkey ?
or see
Table 3.
Table 3.
Table of Contents
