Ftp Client Ipv6 Source - HP Enterprise FlexFabric 12900E Series Command Reference Manual
Hide thumbs
Also See for Enterprise FlexFabric 12900E Series:
- Installation manual (152 pages) ,
- Configuration manual (552 pages)
Table of Contents
Press CTRL+C to abort.
Connected to 192.168.0.211 (192.168.0.211).
220 FTP service ready.
User (192.168.0.211:(none)): abc
*Apr 10 09:02:24:139 2017 Sysname FTPC/7/EVENT: PAM initialization result: 0.
*Apr 10 09:02:24:150 2017 Sysname FTPC/7/EVENT: PAM: Sent a start-accounting request.
Result: 0.
*Apr 10 09:02:24:860 2017 Sysname FTPC/7/COMMAND: USER abc
331 Password required for abc.
Password:
*Apr 10 09:02:25:575 2017 Sysname FTPC/7/COMMAND: PASS XXXX
230 User logged in.
215 UNIX Type: L8
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> *Apr 10 09:02:25:640 2017 SIMWARE FTPC/7/COMMAND: SYST
ftp>
ftp client ipv6 source
Use
ftp client ipv6 source
IPv6 FTP server.
Use
undo ftp client ipv6 source
Syntax
ftp client ipv6 source { interface interface-type interface-number | ipv6
source-ipv6-address }
undo ftp client ipv6 source
Default
No source address is specified for FTP packets sent to an IPv6 FTP server. The device selects a
source IPv6 address as defined in RFC 3484.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number
number. The device will use the interface's IPv6 address as the source address. For successful FTP
packet transmission, make sure the interface is up and is configured with an IPv6 address.
ipv6 source-ipv6-address
transmission, make sure this address is the IPv6 address of an interface in up state on the device.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
The source address specified with the
address specified with the
to specify the source IPv6 address for FTP packets sent to an
to restore the default.
: Specifies an IPv6 address. For successful FTP packet
ftp ipv6
ftp client ipv6 source
101
: Specifies an interface by its type and
command takes precedence over the source
command.
Table of Contents
