Table of Contents
Precautions
• Use a DIN rail for which M5 size screws can be used for mounting.
• Use only the square washers included with the DIN rail adapter.
• Use only one square washer for each mounting screw. If two or more square washers are used together for one mounting
screw, the screw may interfere with the product.
• Align the square washers parallel to the DIN rail.
Installing the DIN rail adapter
This section shows the procedure to attach the DIN rail adapter.
1.
Insert hook A (1) in the lower square hole of two square holes arranged vertically at the upper part of the base module.
2.
Next, push the upper part of hook A (1) until a click is heard.
3.
Project the hook B (3) of the hook B-C (2) on the downside.
(2)
(3)
2 PRODUCT INSTALLATION
24
2.1 Product Installation
(1)
Table of Contents
