Onboard Options Menu - GE Concord 4 Installation Manual
Hide thumbs
Also See for Concord 4:
- Quick setup manual (4 pages) ,
- Quick user manual (6 pages) ,
- Quick user manual (2 pages)
Table of Contents
Onboard options menu
The Onboard options menu includes input, output programming, and output text
settings.
Onboard options - inputs settings
Smoke verify
Shortcut: 1100
Default: Off
Two-wire smoke
Shortcut: 1101
Default: Off
Concord 4 Installation Manual
This setting control the number of sensor group 26 (fire) zone trips needed
to report a fire alarm.
When turned off, hardwire and wireless smoke alarms are reported
immediately.
When turned on:
• Hardwire smoke sensors. Onboard or SnapCard zones learned into group
26 must be in alarm for at least 3 seconds or tripped twice within 5 minutes
before activating system sirens and reporting to a central station (or pager).
• Wireless smoke sensors. The firest trip of a group 26 RF sensor will cause a
local fire alarm. The second trip of any group 26 zone within the siren
timeout will cause that fire alarm to be reported to the central station.
Note: RF smoke detectors repeat the alarm transmission every 60 seconds
as long as they are detecting smoke. This repeated transmission will serve
as the second zone trip, causing the alarm to be reported.
Note: For California State Fire Marshall Listed installations, this feature must
be off.
This setting determines how onboard hardwired zone 8 is configured. When
this setting is on, zone 8 will be configured for two-wire smoke detectors.
When off, it will be configured for a normal hardwire input.
Chapter 3: Programming
75
Chapters
Table of Contents
Troubleshooting
