Troubleshooting - Bosch SmartGrow Life MSGP3L User Manual
Smartgrow life msgp3l
Hide thumbs
Also See for SmartGrow Life MSGP3L:
- User manual (228 pages) ,
- Information for use (40 pages) ,
- User manual (108 pages)
Table of Contents
Available languages
Available languages
en Troubleshooting
Accessory
Microgreen tray MSGZMTL
Wall mount set
Design sleeve
Design clips
Troubleshooting
Light unit will light up continuously red
until the water bowl is removed.
The pump is blocked or the impeller is
missing.
Check that the pump impeller is posi-
1.
tioned correctly.
Check that the pump housing is posi-
2.
tioned correctly.
The device is standing on a magnetic metal
surface.
Check whether the location is suitable in
1.
the long term.
→ "General information", Page 15
18
Designation
MSGZWML
MSGZDS2L,
MSGZDS3L
MSGZDC1L,
MSGZDC2L,
MSGZDC3L
Use
Plant 2 different microgreens at the same time.
¡ Add 1 spoonful (2 g) of nutrients to 1.5 litres of
fresh tap water and pour into the water bowl.
¡ Fit the anti-spill ring, the watering tray and the
microgreen tray.
¡ Place the contents of one microgreen seed bag
in each of the microgreen sections. Fit the mi-
crogreen cover.
¡ Place the light unit on the docking unit and in-
sert the power supply. The light unit lights up
pink and the sprouting phase begins.
¡ If the microgreens have sprouted after 2-4 days,
remove the microgreen cover and insert a height
module if necessary. The microgreens will be
ready for harvesting after around 7 days.
Use the wall mount set to fix the SmartGrow to a
wall.
Choose between different coloured design sleeves
and pull the design sleeve over the water bowl.
Store the nutrients and the spoon in the stow-away
pocket of the design sleeve.
Personalise your SmartGrow with coloured design
clips for the height modules. Replace the design
clips by removing the standard clip for the height
module from the side and then attaching the col-
oured design clip.
Select a different location.
2.
Light unit does not light up.
Device is not connected to the power
supply.
Check whether the power supply is
1.
plugged into a socket.
Check whether the connecting cable is
2.
properly connected to the docking unit.
Ambient temperature above 40 °C. The
overtemperature protection has switched
the device off.
Check whether the location is suitable in
1.
the long term.
→ "General information", Page 15
Printed on 100% recycled paper
Table of Contents
