Cleaning The Device - Bosch SmartGrow Life MSGP3L User Manual
Smartgrow life msgp3l
Hide thumbs
Also See for SmartGrow Life MSGP3L:
- User manual (228 pages) ,
- Information for use (40 pages) ,
- User manual (112 pages)
Table of Contents
Available languages
Available languages
Prepare the descaling solution. Select
1.
one of the following options:
Dissolve two teaspoons of citric acid
‒
in 1 litre of warm water at approx.
50 °C.
Dissolve a descaling tablet in 1 litre of
‒
lukewarm water and wait 5 minutes.
Slowly pour the prepared descaling solu-
2.
tion into the plant tray.
Touch the touch button for 15 seconds
3.
until the light unit lights up green.
26
→ Fig.
a The pump will run for approx. 3 minutes.
Notes
¡ If not all deposits have dissolved, leave
the descaling solution to work for at least
2 hours and then start the pump again.
¡ If necessary, leave the descaling solution
to work in the bowl overnight.
Ordering descaling tablets
Order descaling tablets from customer ser-
vice.
Accessories
Accessory
Height module
Boosting light
module
Blooming light
module
Printed on 100% recycled paper
Designation
MSGZHB1L
MSGZHB2L
MSGZHB3L
Quantity
6 x 18 g
12 x 18 g
Cleaning the device
After descaling, clean all parts thoroughly.
→ Fig.
27
Notes
¡ Clean all parts as indicated in the clean-
ing overview.
¡ After drying re-assemble all parts in re-
verse order.
¡ When inserting the pump impeller, check
that there are no residues on or under-
neath the impeller. The pump impeller
must turn easily.
Overview of cleaning
32
→ Fig.
Use
Insert another height module when the plants have
almost reached the light unit. You can insert up to
4 height modules.
For an additional portion of light. This way, your
plants grow faster and can be harvested earlier.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
The special light for blooming. For maximum
blooming and richer harvesting.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
Cleaning the device en
Order number
311864
311893
-
31
17
Table of Contents
