Table of Contents
Figure 34. Removing a 2.5 inch drive from a 3.5 inch drive adapter
Next steps
Install a 2.5 inch drive into a 3.5 inch drive adapter.
Installing a 2.5 inch drive into a 3.5 inch drive adapter
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the 3.5 inch drive adapter from the 3.5 inch hot swappable drive carrier.
Steps
1. Align the screw holes on the 2.5 inch drive with the screw holes on the 3.5 inch drive adapter.
2. Using a Phillips #2 screwdriver, secure the 2.5 inch drive to the 3.5 inch drive adapter.
42
Installing and removing system components
Safety instructions
on page 27.
Table of Contents
