Table of Contents
3.3.2. Mounting Module in Housing
The STT700 module can be installed in a variety of housings suitable for field mounting (2" or 50mm
pipe mount), direct head mounting, or wall mounting.
Ensure that the installation location is suitable for reliable transmitter operation (e.g. for high
temperature applications, a thermowell extension is recommended to minimize failure rates due to
high ambient temperatures near the transmitter).
ATTENTION:
THIS PRODUCT IS SUPPLIED WITH PLASTIC DUST PLUGS IN THE
CONDUIT/CABLE GLAND ENTRIES. IT IS THE USER'S RESPONSIBILITY TO
PROVIDE CABLE GLANDS, ADAPTORS AND/OR BLANKING PLUGS SUITABLE
FOR THE ENVIRONMENT IN WHICH THIS PRODUCT IS INSTALLED. WHEN
INSTALLED IN A HAZARDOUS LOCATION THE CABLE GLANDS, ADAPTORS
AND/OR BLANKING PLUGS SHALL ADDITIONALLY BE SUITABLE FOR THE
HAZARDOUS LOCATION, THE PRODUCT CERTIFICATION AND ACCEPTABLE
TO THE AUTHORITY HAVING JURISDICTION FOR THE INSTALLATION.
Field Mount Housing with Meter
Revision 1
Field Mount Housing without Meter
Figure 6: Wall Mounting Dimensions
STT700 Temperature Transmitter User's Manual
Field Mount Housing with and
without Meter
Page 11
Table of Contents
Troubleshooting
