Table of Contents
4/18
Load-sensing control block SB11 | About this documentation
Table 1: Required and supplementary documentation
Title
Load-sensing control block SB11
Contains important information on the safe and proper transport, installation,
commissioning, maintenance and removal of the SB11 control block.
Technical data sheet
Contains the permissible technical data.
Please bear in mind that different technical data sheets apply depending
on the version:
Load-sensing control block SB11
Load-sensing directional valves in sandwich plate design SB11-EHS4
Plates for load-sensing control block in sandwich plate design SB11
Hitch control valves EHR
Bosch Rexroth AG, RE 66177-10-R/2021-11-16
1 About this documentation
1�1 Validity of the documentation
This documentation applies to load-sensing control blocks SB11 of Bosch Rexroth
including the following control block segments:
• Connecting plate, end plate
• Control valves SB11-EHS4
• Hitch control valves EHR11-EHS4
▶ Read this documentation completely and, in particular, the chapter 2
"Safety instructions" and the chapter 3 "General instructions on property and
product damage" in the related instruction manual 66177-B before you start
working with the product.
1�2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol
is available to you and you have understood and observed it.
For related documentation on the assembly and repair, please refer to the
above-mentioned manual and, if necessary, to
www.boschrexroth.com/mobile-hydraulics-catalog.
Document number
Document type
66177-B
Instruction manual
Data sheet
66177
66176
66181
66126
Table of Contents
