Table of Contents
RSTi-OM User Manual
GFK-3212A
7.3
Resetting IO-Link Device Parameters to Factory
Defaults
In the event you want to reset the IO-Link device to factory default, typically the IODD file provides the
ability from the IO-Link device manufacturer. Use the following example to reset an IO-Link device.
1. Click the COMMAND button and locate the Restore Factory button.
2. Click the Restore Factory or Load Factory Settings button.
Note: The name of the button is determined by the IO-Link device manufacturer.
Figure 55: Restore Factory Settings
3. Click OK when the Refresh? message appears.
Figure 56: Refresh
Configuring IO-Link Devices
Section 7
Jun 2021
71
Table of Contents
