Table of Contents
6/96
Pressure and flow control system SYDFE1 series 2X, 3X | About this documentation
Title
Installation drawing
General operating instructions for axial piston units
Pressure and flow control system, type SYDFE1, SYDFEE,
SYDFED, SYDFEF, component series 2X
Pressure and flow control system, type SYDFE1, SYDFEE,
SYDFED, SYDFEF, component series 3X
Axial piston variable displacement pump A10VSO series 31,
sizes 18 to 100
Axial piston variable displacement pump A10VSO series 32,
sizes 45 to 180
External control electronics for the SYDFE1 control of the
A10VSO axial piston variable pump, type VT 5041-3X/...
External control electronics (variant) for the SYDFE1
adjustment of the axial piston pump A10VSO
3/3 proportional directional valves, direct operated, with
electrical position feedback, as pilot valve for control
systems SY(H)DFE, type VT-DFP
Axial piston units for use with HF fluids
Hydraulic fluids on a mineral oil basis for axial piston units
Pump pre-load valve for control system SYDFE,
type SYDZ 0001-1X
Pressure transducer for hydraulic applications, type HM20
Pressure transducer for hydraulic applications, type HM20
Bosch Rexroth AG, Edition 10.2021, RE 30011-B
1 About this documentation
1.1
VALIDITY OF THE DOCUMENTATION
This documentation is valid for the following products:
• SYDFE1 series 2X
• SYDFE1 series 3X
This documentation is intended for engineers, fitters, operators, service
technicians and plant operators.
These instructions contain important information on the safe and appropriate
installation, transport, commissioning, maintenance, disassembly and simple
troubleshooting of the pressure and flow control systems SYDFE1 series 2X and
3X.
▶ Read these instructions completely, especially chapter 2 "Safety instructions"
on page 9, before working with the product.
1.2
REQUIRED AND SUPPLEMENTARY DOCUMENTATION
▶ The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
observed it.
Table 1: Required and supplementary documentation
and you have understood and
Document no.
Document type
On request
Contains the outer dimensions,
all ports and the hydraulic circuit
diagram of your pressure/flow control
system SYDFE1
RE 90300-B
Operating instructions
RE 30030
Data sheet
RE 30630
Data sheet
RE 92711
Data sheet
RE 92714
Data sheet
RE 30242
Data sheet
RD 30242-01
Data sheet
RE 29016
Data sheet
RE 90223
Data sheet
RE 90220
Data sheet
RE 29255
Data sheet
RE 30272
Data sheet
RE 30272-MON
Installation instructions
- Quick Links:
- Fault Message
- Fault Analysis
Hide quick links:
Table of Contents
Troubleshooting
