Table of Contents
12/96
Pressure and flow control system SYDFE1 series 2X, 3X | Safety instructions
Bosch Rexroth AG, Edition 10.2021, RE 30011-B
High noise emission during operation!
The noise emission of SYDFE1 control systems depends, among others, on
speed, operating pressure and the installation situation. Under normal operating
conditions, the noise pressure level may rise above 70 dB(A). This can cause
hearing damage.
▶ Always wear hearing protection when you work in the vicinity of a running
SYDFE1 control system.
Hot surfaces!
Risk of burning.
The SYDFE1 control system heats up considerably during operation. The pilot
valve of the SYDFE1 control system gets so hot during operation that you may
burn yourself.
▶ Let the SYDFE1 control system cool down before touching it.
▶ Protect yourself by wearing heat-resistant protective clothing, e.g. gloves.
Risk of intoxication and injury!
Contact with hydraulic fluids can be damaging to your health (e.g. eye injuries,
skin damage, intoxication upon inhalation and swallowing).
▶ Always check the lines for wear and damage before each commissioning.
▶ When doing so, wear protective gloves, safety goggles and suitable working
clothes.
▶ If nevertheless hydraulic fluid comes into contact with the eyes or penetrates
the skin, please consult a doctor immediately.
▶ When handling hydraulic fluids, strictly observe the safety notes of the
hydraulic fluid manufacturer.
Risk of fire!
Hydraulic fluid is easily inflammable.
▶ Keep open fire and sources of ignition away from the SYDFE1 control system.
▶ Ensure sufficient ventilation.
Improperly laid lines and cables!
Risk of stumbling!
▶ Lay cables and lines so that no one can stumble over them.
Uncontrolled system behavior!
The failure of individual components can lead to malfunction of the assembly and
therefore to unforeseeable behavior!
▶ Replace or have defective components replaced immediately.
WARNING
CAUTION
- Quick Links:
- Fault Message
- Fault Analysis
Hide quick links:
Table of Contents
Troubleshooting
