Fujitsu ScanSnap Fi-5110EOX2 Installation Procedures
For windows 98se\me\2000\xp\vista
Hide thumbs
Also See for ScanSnap Fi-5110EOX2:
- Operator's manual (181 pages) ,
- Getting started (130 pages) ,
- Brochure & specs (2 pages)
Quick Links
See also:
Operator's Manual
This document is intended for the installation of the following models of Fujitsu ScanSnap
scanners.
Fi-5110EOX
Hardware requirements.
You will need a PC system that meets our recommended specifications. For recommended PC
system specifications please reference the
need your Operating System Disk.
Step 1:
Option A: Installing the drivers from the Setup CD.
Before connecting the scanner to the computer we recommend installing the scanning
applications first before installing the driver (ScanSnap Manager). After the applications and
drivers are installed proceed to step 2.
Installing Adobe Acrobat.
1. Insert the Adobe Acrobat Setup CD into your CD Rom.
2. Next click the Install Acrobat button and follow the prompts.
3. Do not reboot at this time!
4. Eject the Acrobat CD and go to the next step.
Installing ABBYY FineReader (S500\S510 - Optional for Fi-5110EOX2).
1. Insert the ABBYY FineReader Setup CD into your CD Rom.
2. Next click the Install FineReader for Scansnap button and follow the prompts.
3. Do not reboot at this time!
4. Eject the FineReader CD and go to the next step.
Installing ScanSnap Manger, Organizer, and Cardminder.
1. Insert the ScanSnap Setup CD into your CD Rom.
2. Next click the Install Products button on the Scanner Setup Menu.
3. Follow the prompts and install the ScanSnap Manager, Organizer, and Cardminder.
4. Once all of the above has been completed then remove the Scansnap Setup CD,
Reboot your system.
Special note: If you are installing a Fi-5110EOX, Fi-5110EOX2, S500 or S300 on Vista, then
please follow the additional steps listed below.
Installing Vista Service Packs.
1.
Click here
contain updated versions of the following modules.
a. ScanSnap Manager
b. ScanSnap Organizer
c. CardMinder
2. Close any open applications.
3. Install the three service pack updates listed above. You do not need to reboot
between each service pack install.
4. After the third and final update has been completed reboot your system.
5. Go to Step 2.
Rev 120408
Fujitsu ScanSnap Installation Procedures
Windows 98SE\ME\2000\XP\Vista
Fi-5110EOX2
to download the Vista Service Pack for your model scanner, which will
S500
S510
Scanner Hardware Reference
S300
page. You may also
Page 1 of 3
Related Manuals for Fujitsu ScanSnap Fi-5110EOX2
Summary of Contents for Fujitsu ScanSnap Fi-5110EOX2
- Page 1 4. Once all of the above has been completed then remove the Scansnap Setup CD, Reboot your system. Special note: If you are installing a Fi-5110EOX, Fi-5110EOX2, S500 or S300 on Vista, then please follow the additional steps listed below.
- Page 2 Step 2: Connecting the Scanner. Connect the USB cable to the scanner and the USB port of your PC. Ensure that the cable is securely fastened at both ends. Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.
- Page 3 Fujitsu ScanSnap Installation Procedures Windows 98SE\ME\2000\XP\Vista Special note: Scanner control is done with the ScanSnap Manager. The scanned image is obtained with the scanning application. Congratulations! You have successfully completed and tested your scanner installation. *If you do not have any unzipping software installed on your system, you can download a free evaluation copy at www.winzip.com...