Table of Contents
NL Troubleshooting
Malfunction
Plastic crockery is not No fault. Due to a bearing
dry.
Cutlery is not dry.
Insides of the appliance
are wet after the wash
cycle.
Food remains on the
crockery.
40
Cause
heat storage capacity
dries plastic worse.
Cutlery is not properly
placed in the cutlery basket
or drawer.
No malfunction. For
condensation drying, water
droplets in the rinse aid
hold the reservoir necessary
and desired. The moisture in
the air condenses on the
inner walls of the appliance,
flows downwards and is
pumped out.
Crockery is placed too
close together or the
basket is too full.
Spray arms cannot
rotate freely.
Spray arm nozzles are
clogged.
The seven are polluted.
The strainers are incorrectly
fitted and/or not secured.
Washing program too weak
chosen.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
Troubleshooting
No solution available.
▶
Drops may form at the touch
points of the cutlery.
If possible, arrange the cutlery separately
1. "
from each other." → Page 28
Avoid touch points.
2.
No action required. No action
required.
Arrange the crockery with sufficient
1.
space between them.
The spray jets must be able to
reach the surface of the
dishes.
Avoid touch points.
2.
Arrange the crockery in such a way that it
▶
dishes do not interfere with the
rotation of the spray arm.
Clean the "spray arms"
▶
→
Page 36.
Clean the sieves.
▶
→
"Cleaning Sieves", Page 35
Apply the sieves properly.
1.
→
"Sieve System", Page 35
Secure the seven.
2.
Select a more powerful rinse program
▶
mom.
→ "Programs", Page 17
Only remove coarse food residues
▶
and do not pre-rinse the dishes.
Table of Contents
