Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch SGS2ITI41G
Summary of Contents for Bosch SGS2ITI41G
- Page 1 Dishwasher SGS2ITI41G [en] Information for Use...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Before using for the first time .. 22 General information...... 4 Performing the initial configura- tion.......... 22 Intended use........ 4 Restriction on user group.... 4 Water softening system.... 22 Safe installation ........ 4 Overview of water hardness set- Safe use ........... 6 tings.......... 22 Damaged appliance ...... 7... - Page 3 Basic settings........ 33 Overview of basic settings ..... 33 Changing basic settings.... 33 Cleaning and servicing .... 34 Cleaning the tub ...... 34 Cleaning products ...... 34 Tips on appliance care.... 34 Machine Care ...... 34 Filter system ........ 35 Cleaning spray arms ...... 36 Troubleshooting...... 38 Error code / Fault display / Sig- nal........... 38 Washing results ...... 40...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of scalding! If you open the appliance door while the programme is run- ning, hot water may splash out of the appliance. ▶ Open the appliance door carefully if the programme is still running. WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶... -
Page 8: Risk To Children
en Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. - Page 9 Safety en WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water.
-
Page 10: Preventing Material Damage
en Preventing material damage pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may If you do not have much tableware to damage the appliance. wash, use the additional Half Load Do not use a steam cleaner. function. ▶ So as not to scratch the finish ▶... -
Page 12: Installing And Connecting The Appliance
en Installation and connection Note: The appliance has been tested Connect the appliance to the at the factory to check it is in working power supply. order. It is possible that water has left marks on the appliance. These Drainage connection marks will disappear after the first Connect your appliance to drainage wash cycle. -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 52. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme button Special salt refill indicator Water softening system → "Adding special salt", Page 23 Rinse aid refill indicator Rinse aid system → "Adding rinse aid", Page 25 Water supply display...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme: Programme sequence Additional func- tions Tableware: Time-optimised: Extra Dry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en Remove the basket. Additional func- tion ¡ Especially suitable for drying plastic parts. ¡ There is a slight in- crease in energy con- sumption and the run time is extended. Features Features You can find an overview of the pos- Features Re-attach the basket to the upper sible features of your appliance and... -
Page 20: Bottom Basket
en Features Bottom basket Cutlery basket Arrange pans and plates in the bot- Arrange cutlery in the cutlery basket, tom basket. always without sorting it and with the sharp points downwards. Cutlery basket Large plates up to a diameter of Folding prongs 31 cm can be arranged in the bottom basket as shown. -
Page 21: Baking Sheet Spray Head
Features en Push the lever forwards and fold Note: Check that the appliance is al- down the prongs . ways operated with the top basket or the baking sheet spray head. Inserting baking sheet spray head Use the baking sheet spray head in- stead of the top basket to clean large trays, grilles and plates. -
Page 22: Before Using For The First Time
en Before using for the first time Level Top basket Bottom basket 2 max. ø 24.5 cm 27.5 cm 3 max. ø 27 cm 25 cm Start the Programme with the Before using for the first time Before using for the highest cleaning temperature without tableware. -
Page 23: Setting The Water Softening System
Water softening system en Water hardness °E Hardness range mmol/l Setting value 27 - 38 Hard 3.8 - 5.4 39 - 62 Hard 5.5 - 8.9 Note: Set the water hardness determ- hardness. The higher the water hard- ined on your appliance. ness, the greater the consumption of special salt. -
Page 24: Switching Off The Water Softening System
en Water softening system Note: Only use special salt for ¡ The water hardness is 0 - 8 °E. dishwashers. You do not need to use special Do not use salt tablets. salt. Do not use table salt. Press . Add the special salt to the dis- To open the basic settings, press penser. -
Page 25: Rinse Aid System
Rinse aid system en The consumption values specified Add rinse aid up to the max mark. are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50° programme and the factory value of the water hardness is set to 16 - 20°E. -
Page 26: Switching The Rinse Aid System Off
en Detergent To save the settings, press starch and remove protein. Oxygen- for 3 seconds. based bleaching agents are generally used to remove coloured marks, e.g. tea or ketchup. Switching the rinse aid sys- tem off Note: Follow the manufacturer's in- structions for each detergent. If you find the rinse aid refill indicator Detergent Description... -
Page 27: Unsuitable Detergents
Detergent en Separate detergents Unsuitable detergents Separate detergents are products Do not use detergent which could that do not contain components other cause damage to the appliance or than detergent, e.g. powder deter- present a risk to health. gent or liquid detergent. With powder and liquid detergent the Detergent Description... -
Page 28: Adding Detergent
en Tableware ¡ The function of rinse aid is limited Close the lid of the detergent dis- with combined detergents. You will penser. generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch. -
Page 29: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Only put glasses and china in the is too high. ures. dishwasher if it is marked as dish- After the programme washer-safe by the manufacturer. -
Page 30: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 31: Setting A Programme
Basic operation en Setting a programme Starting the programme To adjust the wash cycle to the soil- Press ▶ ing level of the tableware, select a a The programme has ended when suitable programme. the display shows "0h:00m". Press the programme button re- ▶... -
Page 32: Terminate Programme
en Basic operation few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. Press . a The programme is saved and the appliance switches off. Press to resume the pro- gramme. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07... -
Page 34: Cleaning And Servicing
Tip: You can get our tested and ap- proved Dishwasher Care and Ma- Cleaning the tub chine Cleaner for Dishwashers online at https://www.bosch-home.com/ WARNING store or from customer service. Risk of harm to health! Using detergents containing chlorine Tips on appliance care may result in harm to health. -
Page 35: Filter System
Cleaning and servicing en To ensure optimum cleaning perform- Pour the machine cleaner into the ance, the programme doses the de- detergent dispenser until it is filled tergents independently of each an- completely. other during the relevant cleaning Do not place any additional ma- phase. -
Page 36: Cleaning Spray Arms
en Cleaning and servicing Turn the coarse filter anticlockwise Carefully clean the rim of dirt and remove the filter system . between the coarse and the fine fil- ter. Check that no foreign objects ‒ Re-assemble the filter system. fall into the sump. Make sure that the locking catches on the coarse filter click into posi- tion. - Page 37 Cleaning and servicing en Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 38: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 39 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 40: Washing Results
en Troubleshooting Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:92-40 will light up altern- Filters are soiled or blocked. - Page 41 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 42 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 43 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 26. ing time of the tab is not at- tained.
- Page 44 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 26. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 45 Troubleshooting en Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 47: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 23. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... - Page 48 en Troubleshooting Fault Cause Troubleshooting Appliance does not start. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. ▶ properly. → "Terminate programme", Programme starts automat- You did not wait until pro- ▶...
-
Page 49: Mechanical Damage
Troubleshooting en Mechanical damage Fault Cause Troubleshooting Appliance door cannot be Door lock has been activ- Close the appliance door with ▶ closed. ated. greater force. Door cannot be closed due Check whether the appliance has ▶ to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin-... -
Page 50: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 51: Transporting The Appliance
Customer Service en Unplug the appliance from the Transporting the appliance mains. To avoid damage to the appliance, Cut through the power cord. empty it before transporting. Dispose of the appliance in an en- Note: Always transport the dish- vironmentally friendly manner. washer upright to prevent residual Information about current disposal water getting into the machine's con-... -
Page 52: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications The contact details for Customer Ser- EPREL product database. Please vice can be found in the enclosed then follow the instructions on Customer Service directory or on our searching for the model. The model website. identifier is made up of the charac- ters before the slash in the product Product number (E-Nr.), pro- number (E-Nr.) on the rating plate. - Page 53 Technical specifications en purchase or at least as long as we offer support and spare parts for the relevant appliance.
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.