Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch SGS2ITW33E
Summary of Contents for Bosch SGS2ITW33E
- Page 1 Dishwasher SGS2ITW33E [en] Information for Use...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Before using for the first time .. 21 General information...... 4 Performing the initial configura- tion.......... 21 Intended use........ 4 Restriction on user group.... 4 Water softening system.... 22 Safe installation ........ 4 Overview of water hardness set- Safe use ........... 6 tings.......... 22 Damaged appliance ...... 8... - Page 3 Basic settings........ 32 Overview of basic settings ..... 32 Changing basic settings.... 32 Cleaning and servicing .... 33 Cleaning the tub ...... 33 Cleaning products ...... 33 Tips on appliance care.... 33 Machine Care ...... 33 Filter system ........ 34 Cleaning spray arms ...... 35 Troubleshooting...... 37 Error code / Fault display / Sig- nal........... 37 Washing results ...... 39...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety ¡ Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. ▶... - Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
-
Page 8: Damaged Appliance
en Safety Damaged appliance WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains. - Page 9 Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
-
Page 10: Preventing Material Damage
en Preventing material damage pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may AquaSensor damage the appliance. The AquaSensor is an optical meas- Do not use a steam cleaner. ▶ uring device (light barrier) which So as not to scratch the finish ▶ measures the turbidity of the rinsing on the appliance, do not use water. -
Page 12: Installing And Connecting The Appliance
en Installation and connection ¡ Further information documents Drainage connection ¡ Installation material Connect your appliance to drainage ¡ Mains cable connection so dirty water is dis- ¡ Quick reference guide charged via the wash cycle. Installing and connecting the Installing the drainage connection appliance Consult the installation instructions supplied for the steps required... -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 51. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 25 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 31 "Terminating the programme" → Page 31 "Programmes" → Page 17 Programme button Special salt refill indicator Water softening system → "Adding special salt", Page 22 Rinse aid refill indicator Rinse aid system → "Adding rinse aid", Page 24 Water supply display...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme: Programme sequence Additional func- tions Tableware: Time-optimised: ExtraDry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en Re-attach the basket to the upper Features Features rollers (setting 3) or lower rollers (setting 1). You can find an overview of the pos- Features sible features of your appliance and how to use them here. These features depend on the model of your appliance. -
Page 20: Bottom Basket
en Features Bottom basket Cutlery basket Arrange pans and plates in the bot- Arrange cutlery in the cutlery basket, tom basket. always without sorting it and with the sharp points downwards. Cutlery basket Large plates up to a diameter of Folding prongs 31 cm can be arranged in the bottom basket as shown. -
Page 21: Basket Heights
Before using for the first time en Push the lever forwards and fold To use the prongs again, fold them down the prongs . back up. a The prongs audibly click into posi- tion. Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery basket Level Top basket... -
Page 22: Water Softening System
en Water softening system To ensure good dishwashing results, Water softening system Water softening system you can treat the water with special salt and the water softening system. Hard water leaves limescale on the Water softening system To avoid damage to the appliance, tableware as well as the washing water with a hardness above 9 °E tank and parts of the appliance may... -
Page 23: Switching Off The Water Softening System
Water softening system en hardness. The higher the water hard- Switching off the water ness, the greater the consumption of softening system special salt. If you find the special salt refill indic- ATTENTION! ator irritating, e.g. when using com- ¡ Detergent may damage the water bined detergents with salt replace- softening system. -
Page 24: Regeneration Of The Water Softening System
en Rinse aid system Regeneration of the water Rinse aid system Rinse aid system softening system Rinse aid system In order to obtain fault-free function of Rinse aid the water softening system, the appli- ance performs regeneration of the For optimum drying results, use rinse water softening system at regular in- aid. -
Page 25: Setting The Amount Of Rinse Aid
Detergent en a The display shows Hxx. Close the lid of the dispenser for a The display shows . rinse aid. Press repeatedly until a The lid clicks into position. the display shows the value set at the factory r05. Setting the amount of rinse Press repeatedly until the dis-... -
Page 26: Unsuitable Detergents
en Detergent Combined detergent Detergent Description Besides conventional separate deter- Powder deter- Powder detergent is re- gents, a number of products are gent commended for shorter available with additional functions. "Programmes" → Page 17. These products contain not only de- The dosage can be adjus- tergent but also rinse aid and salt re- ted to the level of soiling. -
Page 27: Adding Detergent
Detergent en pletely dispense with certain sub- Add the detergent to the dry deter- stances. The cleaning effect may gent dispenser. be restricted here. ¡ Set the rinse aid and the water 50 ml softening system to the separate 25 ml detergent or combined detergent 15 ml in use. -
Page 28: Tableware
en Tableware Close the lid of the detergent dis- Damage to glass and table- penser. ware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommendation The following table-... -
Page 29: Arrange Tableware
Tableware en To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 30: Removing Tableware
en Basic operation Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the programme button re- skin. -
Page 31: Starting The Programme
Basic operation en few minutes and then close it. This Starting the programme will help prevent excess pressure Press building up in the appliance and stop ▶ a The programme has ended when the appliance door bursting open. the display shows "0h:00m". Press ... -
Page 32: Basic Settings
en Basic settings Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07... -
Page 33: Cleaning And Servicing
Tip: You can get our tested and ap- proved Dishwasher Care and Ma- Cleaning the tub chine Cleaner for Dishwashers online at https://www.bosch-home.com/ WARNING store or from customer service. Risk of harm to health! Using detergents containing chlorine Tips on appliance care may result in harm to health. -
Page 34: Filter System
en Cleaning and servicing To ensure optimum cleaning perform- Pour the machine cleaner into the ance, the programme doses the de- detergent dispenser until it is filled tergents independently of each an- completely. other during the relevant cleaning Do not place any additional ma- phase. -
Page 35: Cleaning Spray Arms
Cleaning and servicing en Turn the coarse filter anticlockwise Carefully clean the rim of dirt and remove the filter system . between the coarse and the fine fil- ter. Check that no foreign objects ‒ Re-assemble the filter system. fall into the sump. Make sure that the locking catches on the coarse filter click into posi- tion. - Page 36 en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 37: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 38 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 39: Washing Results
Troubleshooting en Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. E:92-40 will light up altern- Filters are soiled or blocked. - Page 40 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 41 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 42 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 25. ing time of the tab is not at- tained.
- Page 43 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 25. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 44 en Troubleshooting Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 46: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 22. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... - Page 47 Troubleshooting en Fault Cause Troubleshooting Appliance does not start. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. ▶ properly. → "Terminate programme", Programme starts automat- You did not wait until pro- ▶...
-
Page 48: Mechanical Damage
en Troubleshooting Mechanical damage Fault Cause Troubleshooting Appliance door cannot be Door lock has been activ- Close the appliance door with ▶ closed. ated. greater force. Door cannot be closed due Check whether the appliance has ▶ to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin-... -
Page 49: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 50: Transporting The Appliance
en Customer Service Unplug the appliance from the Transporting the appliance mains. To avoid damage to the appliance, Cut through the power cord. empty it before transporting. Dispose of the appliance in an en- Note: Always transport the dish- vironmentally friendly manner. washer upright to prevent residual Information about current disposal water getting into the machine's con-... -
Page 51: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en The contact details for Customer Ser- defective supply lines or fittings up vice can be found in the enclosed to the Aqua-Stop connection on Customer Service directory or on our the tap. website. ¡ If your appliance is fitted with Aqua-Stop, you can in principle Product number (E-Nr.), pro- leave your appliance unattended... -
Page 52: Information Regarding Free And Open Source Software
en Technical specifications Information regarding Free and Open Source Software This product includes software com- ponents that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable li- cence information via your Home Connect app: "Profile ->... - Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.