Table of Contents
NL Troubleshooting
Malfunction
Water supply
indicator lit
Indication "Water supply con- There is a technical fault
control" flashes
Indicators flash
38
Cause
Drain hose is clogged or
kinked.
Siphon connection is still closed.
Drain pump cover is
loose.
present.
Appliance door is not
completely closed.
Troubleshooting
Put the plug back in the
10.
socket.
Switch on the device.
11.
Route the drain hose without
1.
kinks.
Remove the remains.
2.
Check the connection to the
▶
fon and open it if necessary.
Remove the cover of the "drain
▶
pump" → Page 49 well fixed.
Press .
1.
Disconnect the appliance from
2.
the mains or switch off the
fuse.
Wait at least 2 minutes.
3.
Plug the appliance into a
4.
mains socket or switch on
the fuse.
Switch on the device.
5.
If the problem occurs
6.
again:
Press .
s
s
Close the tap.
s
Remove the plug from the
socket.
Contact the "service
s
department"
→
Page 51 and mention the
error code.
Close the appliance door.
▶
s
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
Table of Contents
