Table of Contents
6. CHECKUP AND MAINTENANCE
(3) Removing an extension board or a slot cover
[1] Follow the instructions in "6.3.3 Installing and removing the cover of the equipment"
to remove the cover of the equipment.
[2] Remove the screw of the slot where you want to install an extension board or a slot,
and remove an extension board or a slot cover.
Always attach a slot cover to each unused slot and attach a connector cover to
each unused connector. Otherwise, failure of the equipment or a fire may result.
If you bend the tab of the grounding spring at the slot by mistake when you
remove an extension board, be careful not to cut your fingers when you fix the
bend because the tab has a sharp edge.
< NOTE >
There is a case that the panel of the extension board is caught in the claw of the
slot earth spring and it is difficult to remove it. Do not pull it by force.
WARNING
CAUTION
6-10
Table of Contents
