Maintenance
When an error code is displayed
Switch off the unit (P .EN9) and unplug the charging adapter before performing maintenance.
Remove rubbish tangled in the
below
Maintenance of the side brush
(When the bristles of the side brush curls or spreads out)
Soak a cloth in hot water,
●
wrap the cloth around the side
brush for about 10 seconds,
then pull on the bristles
EN22
(Continued)
(P.EN24)
area(s) indicated
Remove tangled hair, etc. using a pair of
●
tweezers
If the side brush stops turning or turn
●
with diffi culty, remove the rotating brush
(P.EN20) and clean the side brush by
rotating them
/ When rubbish is tangled / When deemed necessary
Side brush
■ To remove the side brush to remove rubbish
1
Remove the side brush
① While holding the side brush...
② Remove the screw
2
Remove rubbish from the
indicated below
■ To attach
Insert securely
and tighten the screw.
Screw
Side brush
(Hold the bottom part)
area(s)
Also remove
the rubbish on
the back.
Wash
in water
