Maintenance
When an error code is displayed
Switch off the main unit (P .EN9) and unplug the charging adapter before performing maintenance.
Remove rubbish from the
area(s) indicated below
Except the rotating brush
Wash
in water
and the brush cover
Cut tangled rubbish with scissors
along the groove
Remove tangled hair, etc.
●
using a pair of tweezers
EN20
/ When rubbish is tangled / When deemed necessary
(P.EN24)
Bottom side: Rotating brush and brush cover
■ If you wish to wash the rotating brush and brush
cover with water
1
Remove the brush
cover
Pull up in the direction
indicated by the arrows
while pushing on the
hooks
2
Remove the rotating
brush
3
Remove rubbish
from the
area(s)
indicated below.
4
Wash the rotating
brush and brush
cover with water
and dry properly
■ To attach
1
Fit the rotating brush to the main unit
Fit ① into place, then fi t ② into place
(while pushing ① )
②
2
Put the brush cover in place
① Fit the hooks on the brush cover into the
①
indents on the main unit (2 places), then
② Push them into place until the hooks click
(2 places)
Wash
in water
Hooks
Attach so that the side brush does not get caught
●
①
Indents
①
②
②
