Sharp AQUOS Operation Manual page 15

<<

Tool Operation

Audio (Continue)

Surround Mode

This function allows you to select surround mode for surround on.

Select from the following available settings.

Living room/Cinema/Stadium/Off

Reset Audio

Returns Audio Settings to their factory preset values. To reset, select "Yes"

and then press ENTER.

Wall Mount Setup

This selects the optimal audio for the programme you are currently watching

even when the TV is mounted to a wall.

ENGLISH | 中文(台灣) | 中文(香港) | 中文 | FRANÇAIS | PORTUGUÊS | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬РУССКИЙ | O'ZBEK TILIDA

Clear Voice

This function emphasises speech against background noise for greater

clarity.

Select from the following available settings.

On/Off

NOTE

"Audio Mode" is not available when you set "Audio Out" to "Variable".

(See page 4-3.)

Audio Description Setting (DTV only)

This function allows you to enable output of audio description if the TV

receives a signal including audio description.

NOTE

The audio description sound is superimposed on the main audio when

you select a broadcast compatible with audio description.

This function is available only for DTV broadcasts.

The audio description sound is superimposed on the main audio only

when the sound is output on the speaker sound output, headphone sound

output and sound for audio out output. The sound is not output on the

digital audio output and the HDMI sound output.

This function is not available for the AQUOS Audio speaker system.

This function does not work during USB-recording playback.

EN 3-5

>>