Sharp AQUOS Operation Manual page 13

<<

Tool Operation

Picture (Continue)

Advanced (Continue)

Dynamic Range Enhancement

Enable local dimming to increase the dynamic range and provide better

contrast.

Select from the following available settings.

On/Off

NOTE

When AV MODE is set to "PC", "Dynamic Range Enhancement" is not

available.

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Produces higher contrast image in any scene.

Off: No adjustment.

NOTE

When AV MODE is set to "PC", this function is not available.

Gamma Adjustment

Adjusts the differences of picture tones between bright parts and dark parts.

The adjustment range of the gamma can be set to a maximum of +3 and a

minimum of -3 by pressing

HDR Gamma Adjustment

Emphasize the differences of picture tones between bright parts and dark

parts. The adjustment range of the gamma can be set to a maximum of +2

and a minimum of -2 by pressing

NOTE

"HDR Gamma Adjustment" is available only when receiving HDR signal.

ENGLISH | 中文(台灣) | 中文(香港) | 中文 | FRANÇAIS | PORTUGUÊS | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬РУССКИЙ | O'ZBEK TILIDA

or

.

or

.

Film Mode (3:2 pull-down)

This function provides high-quality playback of images originally encoded at

24 frames/second, such as films.

Select from the following available settings.

Advanced/Standard/Off

NOTE

"Film Mode" does not function depending on input signal type.

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction.

High/Middle/Low: You can select a desired level for viewing a clearer video

image.

Off: No adjustment.

NOTE

"Digital Noise Reduction" is not available when PC format is being input.

Living room view

For wider viewing from various angle.

Select from the following available settings.

On: The image is adjusted to suit a large number of people, such as in the

living room.

Off: No adjustment.

Reset Picture

Returns Picture Settings to their factory preset values. To reset, select "Yes"

and then press ENTER.

EN 3-3

>>