Using A Pc; Setting Audio Input - Sharp AQUOS Operation Manual

<<

Audio Select HDMI

This function sets the terminal to output the computer audio.

The adjustment items vary depending on the input source. Select the input

source corresponding to the terminal connected to the PC and then adjust the

desired item.

To perform the operation, refer to "

> "Audio Select HDMI".

HDMI 2

HDMI: Select this when the TV and PC are connected using an HDMI-

certified cable and audio is input via the same cable.

HDMI + AV Input: Select this when the TV and PC are connected using a

HDMI-certified cable and the audio is input via a Ø 3.5 mm stereo

minijack.

NOTE

When "Audio Select HDMI" is set to "HDMI + AV Input", sound will not be

produced if you use only an HDMI-certified cable to connect HDMI-

compatible equipment. To produce sound, you should make an analogue

audio connection.

If you want to connect HDMI-compatible equipment using only an HDMI-

certified cable, set "Audio Select HDMI" to "HDMI".

"Audio Select HDMI" can only be set for the HDMI IN 2.

ENGLISH | 中文(台灣) | 中文(香港) | 中文 | FRANÇAIS | PORTUGUÊS | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬РУССКИЙ | O'ZBEK TILIDA

(HOME)" > "Settings" > "Input/Output"

EN 8-1

>>