Bosch Professional GRO 12V-35 Original Instructions Manual page 17
Hide thumbs
Also See for Professional GRO 12V-35:
- Original instructions manual (247 pages) ,
- Original instructions manual (79 pages) ,
- Original instructions manual (238 pages)
Table of Contents
Available languages
Available languages
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for cutting metal and stone ma-
terials, and for grinding, sanding and polishing metal and
painted surfaces without the use of water. In addition to this,
the power tool is suitable for drilling in wood, soft metal,
plastic and light building materials when used with the ap-
propriate accessories.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cutting disc
(2) Holding rod
a)
(3) Grinding tools
(4) "PowerLight" lamp
(5) Spindle lock
(6) On/off switch
(7) Speed regulator
(8) Battery charge indicator
(9) Battery
(10) Direction-of-rotation arrow for grinding spindle
(11) Dust protection cap (for detailed work)
(12) Clamping nut
(13) Tool holder of the collet
(14) Handle (insulated gripping surface)
(15) Inner shank dimension L
0
(16) Battery release button
(17) Open-ended spanner/screwdriver
(18) Shank
(19) Collet
(20) Drive spindle
Bosch Power Tools
(21) Dust protection cap (for working close to surfaces)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless multi rotary tool
Article number
Rated voltage
A)
Rated speed
Collets diameter
Spanner flat of collet
Max. outer diameter
– Cutting disc
– Grinding accessory
– Wire brush
– Grinding disc
– Drill bit
Max. inner shank dimension L
0
Max. shank length
Weight according to EPTA-Pro-
B)
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
C)
during operation
and during
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery GBA 12V
2.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 60745-2-23.
Typically, the A-weighted sound pressure level of the power
tool is 74 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-23:
2
2
a
= 9 m/s
, K = 1.5 m/s
.
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
English | 17
GRO 12V-35
3 601 JC5 0..
V=
12
-1
min
5000 – 35,000
mm
3.2
mm
9.55
mm
38
mm
22.5
mm
20
mm
20
mm
3.2
mm
10
mm
35
kg
0.65 – 0.85
°C
0 to +35
°C
–20 to +50
GBA 12V...
GAL 12...
GAX 18...
1 609 92A 6KE | (17.06.2021)
- Quick Links:
- English
Hide quick links:
Table of Contents
