Table of Contents
10) Press qw to switch the item.
f The items will switch each time you press the button.
[POINT]
[HORIZONTAL LINE]
[VERTICAL LINE]
11) Press as to select [GRID WIDTH].
12) Press qw to switch the item.
f The items will switch each time you press the button.
[1] - [10]
13) Press as to select [GRID COLOR].
14) Press qw to switch the item.
f The items will switch each time you press the button.
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[CYAN]
[MAGENTA]
[YELLOW]
[OFF]
15) Press as to select [CONTROL POINTS COLOR].
16) Press qw to switch the item.
f The items will switch each time you press the button.
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[CYAN]
[MAGENTA]
[YELLOW]
17) Press as to select [EXECUTE].
18) Press the button.
f The screen switches to the control point selection mode.
19) Press asqw to select the control point.
f Move the marker over the intersection of the grid lines to adjust.
f When [HORIZONTAL LINE] is selected in Step 10), press as to select the control point.
f When [VERTICAL LINE] is selected in Step 10), press qw to select the control point.
20) Press the button.
f The control point is confirmed, and the screen switches to the adjustment mode.
21) Press asqw to adjust the position of the control point.
f By adjusting the position of the control point, the range to the neighboring intersections will be corrected.
Chapter 4 Settings — [POSITION] menu
Select this item when adjusting by selecting one intersection from the intersections on the grid lines.
Select this item when selecting all the intersections on one horizontal grid line, and adjusting them
simultaneously.
Select this item when selecting all the intersections on one vertical grid line, and adjusting them
simultaneously.
Select the width of the grid line. It can be set between 1 line to 10 lines.
(Factory default setting: [3])
Displays the pattern of the selected color.
(Factory default setting: [RED])
Does not display the pattern.
Select the color of the marker that indicates the control point.
The marker that indicates the control point is displayed in the control point selection mode and
adjustment mode.
(Factory default setting: [WHITE])
ENGLISH - 99
Table of Contents
