Table of Contents
7)
Press asqw to select a character, and press the button.
f Enter the current password.
8)
After entering the password, press asqw to select [OK], and press the button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9)
Press as to select [USER NAME] under [NEW], and press the button.
f The [USER NAME] screen is displayed.
10) Press asqw to select a character, and press the button.
f Enter a new user name.
f Enter the current user name if you do not want to change it.
f Up to 16 characters can be entered.
11) After entering the user name, press asqw to select [OK], and press the button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [PASSWORD] under [NEW], and press the button.
f The [PASSWORD] screen is displayed.
13) Press asqw to select a character, and press the button.
f Enter a new password.
f Up to 16 characters can be entered.
f Enter the current password if you do not want to change it.
14) After entering the password, press asqw to select [OK], and press the button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
15) Press as to select [PASSWORD CONFIRM] under [NEW], and press the button.
f The [PASSWORD CONFIRM] screen is displayed.
16) Enter the password entered in Step 13).
17) After entering the password, press asqw to select [OK], and press the button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
18) Press as to select [STORE], and press the button.
f The confirmation screen is displayed.
19) Press qw to select [OK], and press the button.
Note
f For restrictions on character strings that can be set for password, refer to [PASSWORD POLICY] ( x page 168) .
f The user name and password of the administrator account can also be changed on the [Set up password] page ( x page 192) of the web
control screen.
f The user name and password of a standard user account without administrator rights can be set on the [Set up password] page ( x page 192)
of the web control screen.
[NETWORK CONTROL]
Set the network control of this projector.
Setting the password of the administrator account ( x page 168) is required for using the network function of the
projector.
1)
Press as to select [NETWORK CONTROL].
2)
Press the button.
f The [NETWORK CONTROL] screen is displayed.
3)
Press as to select an item, and press qw to change the setting.
[WEB CONTROL]
[COMMAND CONTROL]
170 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Set to [ON] to control with the web browser.
Set to [ON] to control with the /
PROJECTOR SYNC OUT> terminal control command format ( x page 222) . Refer to "Control
commands via LAN" ( x page 216).
Table of Contents
