Hvac; Temperature Setting - Honeywell TR80 Installation And Operating Manual

Wall module
Table of Contents
3. Secure: Device will lock automatically on timeout. User needs to enter a 4-digit pass-key to
unlock and access controls.
4. No access: device will always be in locked status. No user access to settings in anyway.

3.12 HVAC

3. 12. 1 Temperature setting

The TR80 can operate in absolute or relative setpoint mode. In relative setpoint mode, the user
does not see the absolute setpoint, but has the option to shift it up or down, typically by +/-5
degrees.
Register
type
Holding
Holding
Holding
Holding
Holding
Input
Holding register 'User Setpoint' changes every time the user makes an adjustment on the wall
module. Master controller can write to this register to override the user selected setpoint. Mas-
ter controller can also reset the setpoint to the default value by using the 'Override Reset' regis-
ter explained before in the 'Device' section.
The master controller can disable user setpoint adjustment by setting the min and max regis-
ters to the same value.
'User setpoint limited' register is derived from 'User setpoint' but internally limited between
min & max settings. The 'User Setpoint' register value can fall outside of the min/max range, if
the master controller reduces the range by writing to the min/max registers, for example when
switching to unoccupied or standby modes.
43
Relative
Absolute
Dir
Address
Address
2200
42201
R/W
2201
42202
R/W
2202
42203
R/W
2203
42204
R/W
1200
41201
R/W
202
30203
R
Config
Name
parame
Type
ter
Setpoint
200
enum
style
Setpoint
signed
201
minimum
int
Setpoint
signed
202
maximum
int
Default
203
int
Setpoint
User
signed
-
setpoint
int
User
signed
setpoint
-
int
limited
TR80 - Installation and Operation Guide
Default
Range
Scale
value
0: absolute
-
0
1: relative
absolute: -
Abs:
50...+150 °C
0.1
10°C
relative: -
Rel: -5 K
15...0 K
absolute: -
Abs:
50...+150 °C
0.1
10°C
relative:
Rel: 5 K
0...15 K
10...30° C
0.1
22 °C
Abs:
0.1
22°C
Rel: 0 K
0.1
Table of Contents
loading

Table of Contents