Temperature Display Configuration - Honeywell TR80 Installation And Operating Manual
Wall module
Hide thumbs
Also See for TR80:
- Installation and operating manual (78 pages) ,
- Mounting instructions (2 pages)
Table of Contents
Register
type
Holding
Ring brightness in normal operation and ring brightness in SLEEP mode can be individually
set.
The ring colour and style
(note: check document for consistency of 'colour'/'color' normally changes automatically
based on hvac mode (heating = orange, cooling = blue...) received from controller. The master
controller can override the automatically determined colour by writing a value to the 'Ring
Colour' register. The format is RGB565 (5 bits red, 6 bits green, 5 bits blue from most signifi-
cant to least). A value of 0 (corresponding to black) represents AUTO mode, meaning the LED
ring changes colour according to currently active hvac mode.
The controller can also override the ring style.
3. 11. 3 Temperature display configuration
Register
type
Holding
Holding
Holding
It is possible to disable temperature unit change on the wall module and have it fixed in Celsius
or Fahrenheit.
39
Relative
Absolute
Dir
Address
Address
1101
41102
R/W
Relative
Absolute
Dir
Address
Address
2106
42107
R/W
2107
42108
R/W
2108
42109
R/W
Config
Name
parameter
Ring style
-
Config
Name
parameter
Room
temperature
104
display
resolution
Outdoor
temperature
105
display
resolution
Temperature
unit & user
106
change
option
TR80 - Installation and Operation Guide
Type
Range
0: auto
1: off
2: steady
3: slow breath
enum
4: medium breath
5: fast breath
6: blink
7: fast blink
Type
Range
0: don't display
1: 1 deg
resolution
Enum
2: 0.5 deg
resolution
3: 0.1 deg
resolution
0: 1 deg
resolution
1: 0.5 deg
enum
resolution
2: 0.1 deg
resolution
0: °C (user can
change)
1: °F (user can
enum
change)
2: °C (fixed)
3: °F (fixed)
Default
value
1
Default
value
1
2
0
Table of Contents
