Overriding The Occupancy Mode; Selecting / Overriding Hvac Mode - Honeywell TR80 Installation And Operating Manual

Wall module

Hide thumbs Also See for TR80:

Table of Contents

Occupancy Status

Holiday

2.7.2.1 Overriding the occupancy mode

The user can override the automatically determined mode, if configuration allows.

when an user override is active, the occupancy symbol is blinking.

1. Tap

2. Tap

3. Set the Bypass time in minutes if Bypass occupancy mode is selected or set the

4. Tap

5. Tap

Note: The availability of options and mode depend on the device configuration.

The HVAC modes can be changed from wall module depending on the configura-

tion. Below methods are used to change the HVAC mode such as:

•

Description

The user has overridden the automatic mode and switched the system to

building protection mode temporarily.

The display shows unoccupied symbol with scrolling text "Holiday for ...

days"

to change the occupancy mode.

The display will show blinking text "AUTO".

to select the desired override occupancy mode.

Holiday period in number of days if Holiday Mode is selected.

to exit without saving press.

to activate and Save the selected override occupancy mode.

Simple operation : Wall module user determines the HVAC mode

Advanced operation: HVAC mode is determined in the controller. The user can

temporarily override the automatically determined mode.

TR80 - Installation and Operation Guide