Table of Contents
Function
[CANCEL]
Auto Send (Auto Push)
Auto Send automatically transfers images to another network device when the exam is closed. Auto
Send is enabled and configured from the Utilities – Preferences screen.
For mobile units, Auto Send will begin the next time the unit is connected to the network.
Follow this process to configure Auto Send.
1. From the Worklist screen, press [UTILITIES].
2. Select Preferences > Image Management.
3. Click Auto Push [EDIT].
The Auto Send screen appears.
4. Complete the information as described in Table A7-8.
5. When finished, press [SAVE] to retain your changes.
Figure A7-15 Auto Send
Table A7-8 Auto Send Functions
Function
Auto Send
[ON] [OFF]
Network Host column
Definium AMX 700 X-Ray System
Operator Manual
Closes the Auto Print screen without saving your changes.
Turns Auto Send on or off.
Selecting On allows you to configure the default Auto Send settings.
Lists the available network locations where images may be transferred.
Refer to
Network Connections
configure the available Network Hosts.
5161515-1EN
© 2008 General Electric Company. All rights reserved.
Chapter A7: Set Preferences
Description
Description
(p. A7-2) for information about how to
Rev. 6 (10 February 2008)
A7-22
Table of Contents
