Page 1
OmniAssure Touch Square Installation Instructions / OmniAssure Touch Square Installation Instructions........2 This documentation can be downloaded from our websites in English, German, French, Spanish, Italian, Portuguese, Czech, Polish, Russian, Turkish and Mandarin. GLOBAL: www.security.honeywell.com DACH: www.security.honeywell.de Model name Smart proX...
Page 2
Depending on the type of mounting, the cable reserve can be placed in General the flush mounted socket, or in a nearby junction box. The OmniAssure Touch Square Reader was tested at the panels: 3.1.3 Outdoor use – NetAXS 123 V6 (Wiegand) –...
Page 3
Installation Instructions / OmniAssure Touch Square Test the reader / Commissioning Tamper line Physical tamper switches: Tamper line Apply power (the green LED indicates power) and present a valid creden- – tear-off tial. The light ring should flash and the sounder should produce a short mechanical tamper switch tone indicating a successful read.
Page 4
Installation Instructions / OmniAssure Touch Square OmniAssure Touch Square Requirements to credential type and operation The following notes and information can be found in the product accom- panying documents of the panels: – NetAXS 123 V6 (Wiegand) – ProWatch 6k (Wiegand) –...
Page 5
4. Installer/dealer can access the reader via config app ‘Reader Utility by ment readers OmniAssure, item no. OT4700BHONG, Honeywell’ (Google Play store). Verification is required (SITE code). OT4716BHONG, OT4800BHONG, OT4816BHONG, The access control system uses 3 types of verification for the user: OT4700WHONG, OT4716WHONG, OT4800WHONG Available are pin code, physical credential and mobile credential.