Time & Date Setting; Telephone Ringing Assignment - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide

☞ Default value specified by country;

Before start of Programming, select your country if you require to change the default.

For the details of default value, check Programming Manual (separate issue).

Time & Date Setting

You may want to change this setting when the time and date on the Multi-Line Telephone is not correct.

Program10-01-xx

1. After Log-In to the Programming Mode.

2. Dial 10 01 01.

Edit the last two digits of the year (e.g 11) you can overwrite the current

entry.

Press Hold key to confirm the entry and step to the next option.

3. Enter the two digits of the month (01-12).

Press Hold key to confirm the entry and step to the next option.

4. Enter the two digits of the day (01-31).

Press Hold key to confirm the entry and step to the next option.

5. Enter the one digits of the week (1-7).

1= Sunday, 2= Monday, 3= Tuesday....etc.

Press Hold key to confirm the entry and step to the next option.

6. Enter the two digits of the hour (24hour format).

Press Hold key to confirm the entry and step to the next option.

7. Enter the two digits of the minutes (00-59).

Press Hold key to confirm the entry and step to the next option.

8. Enter the two digits of the seconds (00-59).

Press Hold key to confirm the entry and step to the next option.

9. Press Mute key several times when you are done to return to the

Program Mode.

10. Press Speaker key to save changes and exit from the Programming

Mode.

You may want to change this setting if:



You want one, or more, Outside(CO) lines to ring at one or more telephones.



You want a dedicated Outside(CO) line to ring at a specific telephone.



You want Outside(CO) lines to ring at a different locations throughout the day or at the weekend.

System Operation:

The ringing assignment is achieved by pointing the Outside(CO) line to Incoming Ring Groups. The ring group

then contains the telephones that will ring.



Route each Outside(CO) line to an Incoming Ring Group (IRG) in Program 22-05-01. A line can route to a

different IRG in each night mode.

You then place telephones into IRG's in program 22-04-01, a phone can be a member of more than one IRG. Up

to 32 telephones can be entered per IRG.

Route each line to a Ring Group.

You can have a different Ring Group

per night mode.

Operation

Assign telephones to the Ring

29

Display shows;

Program Mode

10-01-01

Year

10

10-01-02

Month

8

10-01-03

Day

30

10-01-04

Week(1:Sun)

2

10-01-05

Hour

10

10-01-06

Minute

10

10-01-07

Second

10

Program Mode

FRI 28 1:49PM

200

Group.