Control Unit Cu310-2 Pn (Profinet); Description - Siemens S120 PM240-2 Manual

6.1

The CU310-2 Controller Units are designed for operation connected to a Power Module, in the Blocksize or

chassis formats.

The Control Unit CU310-2 PN (PROFINET) is a control module for single drives in which the open-loop and

closed-loop control functions of the drive are implemented.

It controls the Power Modules in the Blocksize format via the PM-IF interface and is mounted directly on the

Power Module.

The table shows an overview of the available interfaces on the CU310-2 PN.

Table 10 Overview of the CU310-2 PN interfaces

Type

Isolated digital inputs

Non-isolated digital inputs/outputs

Isolated digital output

Non-isolated analog input

DRIVE-CLiQ interface

PROFINET interfaces

Serial interface (RS232)

Encoder interface (HTL/TTL/SSI)

LAN (Ethernet)

Temperature sensor input

EP terminal

Measuring sockets

NOTE:

For the characteristics of interfaces and inputs / outputs refer to the manual SIEMENS S120-GH6

Siemens PM240-2_EN_rev00-30082019.docx

Quantity

11

8

1

1

1

2

1

1

1

1

1

3

6-1