Table of Contents
Installation
2.2 Installing the first projector (Set A)
Deciding installation position
Decide on the position of Set A and its projection angle.
→
Arrangement
WARNING ►You can install the projector for any direction with specified
mounting accessories. Consult with your dealer about such a special installation.
• Set the tilt angle of Set A to within 3 degrees from the level line.
NOTE
Setting up Set A
1.
Turn on Set A.
2.
R u n t h e INSTALLATION setting if necessary as it may change the
image position.
3.
Adjust the image of Set A to fit the screen with the Z O O M, FOCUS and LENS
SHIFT f e a t u r e s .
Adjust the image position using KEYSTONE, PERFECT FIT or WARPING i f
necessary.
(Operating Guide
• KEYSTONE, PERFECT FIT, and WARPING functions cannot be
NOTE
used at the same time. Use an appropriate function.
• If using Simple Stack, go to
(continued on next page)
and
Adjusting the projector's
(Operating Guide
(Operating Guide
2.3 Installing the second projector (Set
elevator)
→
SETUP menu
→
Adjusting the
→
EASY MENU
6
(User's Manual (concise)
)
lens)
o r
SETUP
menu)
B). ( 8 )
QM00974-1
Table of Contents
