Installing The Rst Projector (Set A); Deciding Installation Position; Setting Up Set A - Hitachi CP-X8150 User Manual
Hide thumbs
Also See for CP-X8150:
- User manual (313 pages) ,
- Preliminary specifications (2 pages) ,
- Quick manual (1 page)
Table of Contents
2.2 Installing the first projector (Set A)
Deciding installation position
Decide the position of Set A and its projection angle. (
→
Arrangement
and
WARNING ►Only for
to install the projector for any direction with specied mounting accessories.
Consult with your dealer about such a special installation.
NOTE
• Set the tilt angle of Set A to within 9 degrees from the level line.
Setting up Set A
1.
Turn on Set A.
2.
Perform the INSTALLATION setting rst if necessary as it may change the
image position. (
3.
Adjust the image of Set A to t the screen with the ZOOM, FOCUS and LENS
SHIFT features. (
Adjust the image position using KEYSTONE and PERFECT FIT if necessary.
(
Operating Guide
NOTE
• KEYSTONE cannot be operated when PERFECT FIT is in use.
To adjust the image using both KEYSTONE and PERFECT FIT, adjust
KEYSTONE rst.
• If you are using Simple Stack, go to
(Set
B). (
8 )
(continued on next page)
Adjusting the projector's
,
Operating Guide
Operating Guide
→
EASY MENU
User's Manual (concise)
elevator)
and
→
SETUP menu
→
Adjusting the
or
SETUP
menu)
2.3 Installation of the second projector
6
Installation
, it is possible
)
lens)
- Quick Links:
- Replacing the Lamp
Hide quick links:
Chapters
Table of Contents
Troubleshooting
