Hitachi CP-X8150 User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X8150
  6. User manual
Hitachi CP-X8150 User Manual

Hitachi CP-X8150 User Manual

Hide thumbs Also See for CP-X8150:
Table of Contents

Quick Links

See also: User Manual , Quick Manual
Projector
CP-X8150/CP-X8160/CP-WX8240
CP-WX8255/CP-SX8350/CP-WU8440
CP-WU8450
User's Manual (detailed)
Instant Stack Guide
Thank you for purchasing this product.
Features
This projector can be used with another projector of the same model to project an
image on the same screen using the Instant Stack feature.
The two projectors can be operated simultaneously to make the image brighter.
Moreover, if you connect two projectors with RS-232C cross-over cable, it turns to
a kind of intellectual stacking system. The two projectors can work alternately by
themselves, and once one projector has an accident the other voluntarily starts to
work to keep your presentation going.
These features, generically called Instant Stack, provide you with the broad use.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
NOTICE
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Follow all the instructions in the manuals or on the product. The manufacturer
assumes no responsibility for any damage caused by mishandling that is beyond
normal usage defined in the manuals.
• The information in this manual is subject to change without notice.
NOTE
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
All the trademarks in this manual are the properties of their respective owners.
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result
in personal injury or physical damage due to incorrect handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
1
Table of Contents
loading

Related Manuals for Hitachi CP-X8150

Summary of Contents for Hitachi CP-X8150

  • Page 1 Projector CP-X8150/CP-X8160/CP-WX8240 CP-WX8255/CP-SX8350/CP-WU8440 CP-WU8450 User's Manual (detailed) Instant Stack Guide Thank you for purchasing this product. Features This projector can be used with another projector of the same model to project an image on the same screen using the Instant Stack feature.

  • Page 2: Table Of Contents

    Contents   1. Introduction ......3 3. STACK menu settings ..13 1.1 Basic information 3.1 Displaying STACK menu .... 13 and preparations ......3 3.2 Selecting Main, Sub or off ..14 Instant Stack ........3 3.3 Selecting lamp operation mode .. 15 Intellectual Stack and Simple Stack ..

  • Page 3: Introduction

    1. Introduction 1.1 Basic information and preparations Instant Stack Instant Stack is a feature that allows you to superimpose images projected from two projectors easily. Intellectual Stack and Simple Stack Instant Stack includes the following two features. When two projectors are connected via an RS-232C cable with necessary set- tings performed on the projectors, these two projectors will automatically operate in synchronization with each other according to the settings.
  • Page 4 Introduction 1.1 Basic information and preparations (continued) NOTICE ► Intellectual Stack can be operated only in pairs of the same model projectors. ► A maximum of two projectors can be used as Intellectual Stack. ► Depending on the installation and surrounding environment, images projected from the two projectors may not superimpose well enough.

  • Page 5: Installation

    2. Installation For safety reasons, read 1.1 Basic information and preparations ( 3, 4 ) carefully before installation. In addition, take note of the followings for proper use of Instant Stack. ● When using Intellectual Stack, both projectors will respond to the remote control signals until STACK MODE on either projector is set to SUB.

  • Page 6: Installing The First Projector (Set A)

    Installation 2.2 Installing the first projector (Set A) Deciding installation position Decide the position of Set A and its projection angle. (User’s Manual (concise) → Arrangement Adjusting the projector’s elevator) WARNING ►Only for CP-X8160, CP-WX8255 and CP-WU8450, it is possible to install the projector for any direction with specified mounting accessories.
  • Page 7 Installation 2.2 Installing the first projector (Set A) - Setting up Set A (continued) Display the menu with the MENU button. (Operating Guide → Using the menu function) Use the ▲/▼/◄/► buttons to go into the following menu. ADVANCED MENU > OPTION >...

  • Page 8: Installing The Second Projector (Set B)

    Installation 2.3 Installing the second projector (Set B) Deciding installation position Decide the position of Set B and its projection angle. (User’s Manual (concise) → Arrangement Adjusting the projector’s elevator) WARNING ►Only for CP-X8160, CP-WX8255 and CP-WU8450, it is possible to install the projector for any direction with specified mounting accessories.
  • Page 9 Installation 2.3 Installing the second projector (Set B) - Setting up Set B (continued) Adjust the image size and position of Set B with the ZOOM, FOCUS and LENS SHIFT features such that the image can be superimposed well to the image of Set A.

  • Page 10: Confirming Main And Sub Settings

    Installation 2.4 Confirming Main and Sub settings Press the MENU button on the remote control for Main (Set B). NOTE • When Intellectual Stack is in use, only Main is capable of receiving the remote control signals, Sub will not respond to the remote control signals. The following dialogs appear on the lower right screen.

  • Page 11: Fine Adjusting Image Position

    Installation 2.5 Fine adjusting image position To superimpose the images of Main (Set B) and Sub (Set A), fine adjust the im- age size and position of Main (Set B) using PERFECT FIT. For Intellectual Stack users Main (Set B) Press the MENU button on the remote control or the

  • Page 12: For Simple Stack Users

    Installation For Simple Stack users Press the MENU button on the remote control to display the menu on Set A. Use the ▲/▼/◄/► buttons to open the TEMPLATE dialog, then select STACK on the dialog. (Operating Guide → SCREEN menu) Press the MENU button on the control panel of Set B to display the menu.

  • Page 13: Stack Menu Settings

    3. STACK menu settings Set the Intellectual Stack operation using the STACK menu. • If you are using Simple Stack without RS-232C connection, skip this NOTE chapter. • If you do not need to change the settings made during the installation explained prior to this chapter, go to 3.3 Selecting lamp operation mode.

  • Page 14: Selecting Main, Sub Or Off

    STACK menu settings 3.2 Selecting Main, Sub or off To enable Intellectual Stack, select either MAIN or SUB. Intellectual Stack starts when one projector is set to MAIN and the other is set to SUB in the STACK MODE dialog. To disable Intellectual Stack, select OFF. Highlight STACK MODE in the STACK menu with the ▲/▼...

  • Page 15: Selecting Lamp Operation Mode

    STACK menu settings 3.3 Selecting lamp operation mode Select the DUAL or ALTERNATE lamp operation mode. Highlight LAMP MODE in the STACK menu with the ▲/▼ buttons, then press the ► button to display the LAMP MODE dialog. Use the ▲/▼ buttons in the dialog to highlight DUAL or ALTERNATE. DUAL: Turns on the projectors at the same time.
  • Page 16 STACK menu settings 3.3 Selecting lamp operation mode (continued) NOTE • When DUAL is selected for LAMP MODE, the images projected from the Main and Sub projectors may be different. It is recommended to set the projectors as follows. - Set the same image for TEMPLATE and START UP on the Main and Sub projectors.

  • Page 17: Selecting Lamp Switching Mode

    STACK menu settings 3.4 Selecting lamp switching mode The following setting is necessary only when ALTERNATE is selected in the LAMP MODE dialog. ( 15 ) Select the AUTO or NORMAL lamp switching mode when using ALTERNATE. Highlight ALTERNATE MODE in the STACK menu with the ▲/▼...

  • Page 18: Selecting Input Source For Sub

    STACK menu settings 3.5 Selecting input source for Sub Highlight SUB INPUT SOURCE in the STACK menu with the ▲/▼ buttons, then press the ► button to display the SUB INPUT SOURCE dialog. Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED (COMPUTER IN 1).

  • Page 19: Exiting Intellectual Stack Menu

    STACK menu settings 3.6 Exiting Intellectual Stack menu Before exiting menu operation for Intellectual Stack, it is recommended to check all the settings in the STACK menu. For dialogs that are called from the STACK menu, you can press the ◄ button to return to the STACK menu. Refer to the following to exit menu operation for Intellectual Stack.

  • Page 20: Important Information For Intellectual Stack

    STACK menu settings 3.7 Important information for Intellectual Stack This section provides important information for setting up the Main and Sub projectors, not explanations on operating the menus. Read all information carefully. ● To use Intellectual Stack, one projector must be set to Main and the other set to Sub.
  • Page 21 STACK menu settings 3.7 Important information for Intellectual Stack (continued) ● The Main and Sub projectors have the following common settings. - AV MUTE (Operating Guide → Temporarily turning off the screen and audio) - Magnifying feature (Operating Guide → Using the magnify feature) - ASPECT and OVER SCAN...
  • Page 22 STACK menu settings 3.7 Important information for Intellectual Stack (continued) Example: Cover Error: Lamp cover is opened. Lamp Error: Lamp does not light up. Fan Error: Problem with cooling fan. Temp Error: Temperature of the projector is too high. Air Flow Error: Temperature of the projector is too high, check that the exhaust vents are not blocked.

  • Page 23: Connecting Cables

    4. Connecting cables To superimpose two images onto one screen, the same image must be input to the Main and Sub projectors. There are various methods to input the image to the projectors. This chapter describes the ways of connecting the cables. Read this chapter to find a method that meets your needs.

  • Page 24: Connecting Signal Cables

    Connecting cables 4.2 Connecting signal cables There are two methods to input image to the Sub projector. ( 18, 19 ) - Inputting image from the MONITOR OUT port on Main to Sub. - Inputting image to Sub and Main individually. Inputting image from Main to Sub Connect the MONITOR OUT port on Main to the COMPUTER IN1 port on Sub with a...

  • Page 25: Setting Input Ports Using Menu

    5. Setting input ports using menu 5.1 Preparing for menu operations If Simple Stack without an RS-232C connection is used, press the button corresponding to the port on the remote control or the INPUT button on the projector to select the port to which the cable is connected. For setting of MONITOR OUT, refer to SETUP menu Operating...

  • Page 26: Starting Up Main Projector

    Setting input ports using menu 5.3 Starting up Main projector After performing section 5.2 Checking Main projector's operating status, the two projectors are confirmed to have been set to ALTERNATE mode and the Sub projector is currently operating. As the settings for Intellectual Stack can be changed only when the Main projector is operating, this section explains how to switch from the Sub projector to the Main projector.

  • Page 27: Setting The Menu

    Setting input ports using menu 5.4 Setting the menu If Intellectual Stack with RS-232C connection is used, observe the followings. When inputting image signals to Sub via Main, the operations differ between using computer signals and video signals such as component and video signals. Inputting image from Main to Sub - Computer signal If the STACK menu is already displayed on the screen, proceed to 3 below.

  • Page 28: Inputting Image From Main To Sub - Video Signal (Either Component Or Video)

    Setting input ports using menu Inputting image from Main to Sub - Video signal (either component or video) If the STACK menu is already displayed on the screen, proceed to 3 below. Otherwise press the MENU button on the remote control. If the MENU dialog is displayed, use the ▲/▼...
  • Page 29 Setting input ports using menu 5.4 Setting the menu - Inputting image to Sub and Main individually (continued) Use the ▲/▼ buttons to highlight SUB INPUT SOURCE, and press the ► button to display the SUB INPUT SOURCE dialog. Use the ▲/▼ buttons to highlight FOLLOW MAIN UNIT, and press the ►...

  • Page 30: Restrictions On Schedule Function

    6. Restrictions on Schedule function This model supports the Schedule function on the Projector Web Control feature. (Network Guide → 3.1.7 Schedule Settings) There are some restrictions on the functions when Intellectual Stack with RS-232C connection is used. But for Simple Stack without an RS-232C connection, there is no restriction on the functions.
  • Page 31 Restrictions on Schedule function 6. Restrictions on Schedule function (continued) are operating in Intellectual Stack. If the input port to be changed according to the Schedule function can be used in Intellectual Stack, the Schedule will be executed. If not, it will not be executed. X *2): This Schedule can be input to Projector Web Control when the projectors are operating in Intellectual Stack but it will not be executed.

  • Page 32: Troubleshooting

    7. Troubleshooting About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomena that may be easy to be mistaken for machine defects Reference Phenomenon Cases not involving a machine defect page No power is supplied to the Main and Sub projector.
  • Page 33 Troubleshooting 7. Troubleshooting (continued) Reference Phenomenon Cases not involving a machine defect page The settings on the projectors are not set for the Intellectual Stack feature. Check the following settings on the Main and Sub projectors. The STACK - STANDBY MODE in SETUP menu: menu cannot 5 NORMAL...

This manual is also suitable for:

Cp-x8160Cp-wu8440Cp-wu8450Cp-wx8240Cp-wx8255Cp-sx8350

Table of Contents