Hitachi MC-WU5506M User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. MC-WU5506M
  6. User manual

Hitachi MC-WU5506M User Manual

Hide thumbs
Table of Contents

Quick Links

LCD Projector
MC-WU5506M
MC-WX5506M
User's Manual (concise)
Thank you for purchasing this projector.
This is the basic manual on the product. Visit our website to get the detailed
manuals and the latest information on the product. Check them before using the
product, for safe use and utilization of the product.
Our website: See the attached sheet.
WARNING
product. After reading them, store them in a safe place for future reference.
Heed all the warnings and cautions in the manuals or on the product.
ollow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, "the manuals"
means all the documents provided with this product, and "the product" means this
projector and all the accessories came with the projector.
Contents
irst of all ............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
recycling systems .............................................4
Contents of package........................... 4
Arrangement ....................................... 6
efore using this product, be sure to read all manuals for this
Connecting power supply ................. 11
astening the cable .......................... 11
Turning on the power ........................ 12
Displaying the picture ....................... 14
Turning off the power ........................ 15
Replacing the lamp ........................... 16
the internal clock battery ................. 20
Speci cations ................................... 21
1
Table of Contents
loading

Related Manuals for Hitachi MC-WU5506M

Summary of Contents for Hitachi MC-WU5506M

  • Page 1: Table Of Contents

    LCD Projector MC-WU5506M MC-WX5506M User's Manual (concise) Thank you for purchasing this projector. This is the basic manual on the product. Visit our website to get the detailed manuals and the latest information on the product. Check them before using the product, for safe use and utilization of the product.

  • Page 2: Irst Of All

    First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.

  • Page 3: Regulatory Notices

    Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.

  • Page 4: Isposal Of Ld E Uipment And Atteries Only For European Union And Countries With Recycling Systems

    Regulatory notices (continued) Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available.

  • Page 5: Preparing For The Remote Control

    Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

  • Page 6: Arrangement

    Arrangement Refer to tables T-1 to T-2 at the back of this manual as well as the following to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. Ⓗ × Ⓥ : Screen size ⓐ...
  • Page 7 Arrangement (continued) WARNING Install the projector where you can access the power outlet easily. Install the projector in a stable horizontal position. • Do not use any mounting accessories except the accessories speci ed by the manufacturer. Read and keep the manuals of the accessories used. •...

  • Page 8: Connecting With Your Devices

    Connecting with your devices efore connecting the projector to a device, consult the manual of the device to con rm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
  • Page 9 WARNING Use only the appropriate accessories. Otherwise it could cause a re or damage the projector and devices. • Use only the accessories speci ed or recommended by the projector’s manufacturer. It may be regulated under some standard. • Neither disassemble nor modify the projector and the accessories. •...

  • Page 10: Attaching The Terminal Cover

    Attaching the terminal cover Terminal cover Hook Claw Insert the two claws of the Terminal cover into the hole of the case and con rm Hook is tting into the case. When detaching the Terminal cover, push the Hook in the direction of the arrow and pull it forward. NOTE •...

  • Page 11: Connecting Power Supply

    Connecting power supply Put the connector of the power cord into the AC (AC inlet) of the projector. Power cord irmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON function activated, the connection of the power supply make the projector turn on.

  • Page 12: Turning On The Power

    Turning on the power Make sure that the power cord is rmly and correctly connected to the projector and the outlet. STANDBY/ON button Make sure that the POWER indicator is lighted in steady orange. Then POWER indicator remove the lens cover. Press the STANDBY/ON button on the projector or the remote control.

  • Page 13: Adjusting The Projector's Elevator

    Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a 11°...

  • Page 14: Displaying The Picture

    Displaying the picture VOLUME Activate your signal source. Turn the signal MYBUTTON INPUT VOLUME + / - ASPECT PbyP AUTO FREEZE MAGNIFY FOCUS ZOOM VOLUME source on, and make it send the signal to the buttons PAGE GEOMETRY PICTURE MUTE projector.

  • Page 15: Turning Off The Power

    Turning off the power STANDBY/ON button Press the STANDBY/ON button on the projector or the remote control. POWER indicator The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in MYBUTTON...

  • Page 16: Replacing The Lamp

    Replacing the lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
  • Page 17 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 18: Cleaning And Replacing The Air Lter

    Cleaning and replacing the air filter Please check and clean the air lter periodically. When the indicators or a message prompts you to clean the air lter, comply with it as soon as possible. In addition, the extra air lter is attached to inner side of the lter cover. If one of the lters is damaged or heavily soiled, replace whole lter set with a new one.
  • Page 19 leaning and replacing the air lter (continued) Turn the projector on and reset the lter time using the ILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the ILTER TIME using the cursor buttons, then press the cursor (or the ENTER / the RESET) button.

  • Page 20: Installing Or Replacing The Internal Clock Battery

    Installing or replacing the internal clock battery This product has an internal clock. When you use the function that requires the internal clock ( “Event Scheduling” in the Network Guide), install a new battery. If the internal clock starts to malfunction, try to replace the battery. Use the following type of battery, and follow the steps below.

  • Page 21: Speci Cations

    466 (W) x 138 (H) x 337 (D) mm 460 (W) x 122 (H) x 334 (D) mm (Not including protruding parts.) Size MC-WU5506M : 466 (W) x 138 (H) x 339 (D) mm 460 (W) x 122 (H) x 334 (D) mm (Not including protruding parts.) Refer to gure F-5 ~ 6 at the back of this manual.
  • Page 22 peci cations (continued) Item Speci cation COMPUTER IN ......D-sub 15 pin mini jack x1 HDMI 1 / MHL ....... HDMI / MHL connector x1 HDMI 2 ........... HDMI connector x1 HDMI OUT ..........HDMI connector x1 HDBaseT ............RJ45 jack x1 MONITOR OUT ......

  • Page 23: Troubleshooting - Warranty And After-Service

    Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, rst refer to “Troubleshooting” of User’s Manual - Operating Guide and Network Guide, and run through the suggested checks.
  • Page 24 Troubleshooting - Warranty and after-service (continued) End User License Agreement for the Projector Software • Software in the product consists of the plural number of independent software modules and there exist our copyright and/or third party copyrights for each of such software modules.

This manual is also suitable for:

Mc-wx5506mCp-wu5500Mc-wu5506

Table of Contents