User manual
Washer & Dryer
HWD120-B14876
Table of Contents
loading

Summary of Contents for Haier HWD120-B14876

  • Page 1 User manual Washer & Dryer HWD120-B14876...
  • Page 2 Thank You Thank you for purchasing this product. Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
  • Page 3: Table Of Contents

    Content 1-Safety information ........................... 4 2-Product description ......................... 7 3-Control panel ..........................8 4-Programmes ..........................12 5-Daily use ..........................6-Eco-friendly washing ........................18 7-Care and cleaning .......................... 19 8-Troubleshooting ..........................22 9-Installation ..........................26 10-Technical data ..........................30...
  • Page 4: 1-Safety Information

    1-Safety information ing safety hints! WARNING! Make sure there is no transport damage. Make sure all transport bolts are removed. Remove all packaging and keep it out of children’s reach. Handle the appliance always with at least two persons because it is heavy.
  • Page 5 1-Safety information WARNING! Daily use Do not remove or insert the plug in the presence of flammable gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any washing cycle. Do not press the door during the washing process,it gets hot.
  • Page 6 1-Safety information WARNING! Installation Install or use the appliance only in where the temperatuer is above 5 °C. Do not place the appliance directly on a carpet or close to a wall or furniture. Do not install the appliance in direct sunlight or near heat sources(e.g.
  • Page 7: 2-Product Description

    2-Product description Note: 2.1 Picture of appliance (Picture is schematic, please refer to actual product) Front (Fig. 2-1): Rear side (Fig. 2-2): 5 6 7 1 Detergent / Softener 5 Panel 1 Iron bar (I1-I2) drawer Door 2 T ransportation bolts (T1 -T4) 2 Worktop 7 Sevice flap 3 Rearward reinforcement...
  • Page 8: 3-Control Panel

    3-Control panel Function buttons: 1 Detergent / Softener drawer 5 Start/Pause 9 Temp. 2 Display 10 I-time 6 Dry 3 Programme selector 7 Rinse 11 Child lock (Delay+I-time) “Power” button 8 Speed 12 Delay Note : Acoustic signal In following cases an acoustic signal sounds: when pressing a button at the end of programme when turning the programme selector...
  • Page 9 Press it again for about 2 seconds to switch off, if no panel element or programme is activated after a while machine will shut down automatically. HWD120-B14876 3.5 “Start/Pause” button Press this button (Fig. 3-6) gently to start or interrupt the currently displayed programme.
  • Page 10 3-Control panel 3.6 Function buttons The function buttons (Fig. 3-7) enable additional op- tions in the selected programme before programme start. The related indicators are displayed. By switching off the appliance or a programme running all options are disabled. If a button has multiple options, the desired option can be selected by pressing the button sequentially.
  • Page 11 3-Control panel 3.6.3 Function “Child lock” 3-10 This option blocks all panel elements against activation. After programme start press button “ Delay” and “I-time” (Fig. 3-10) simultaneously for 3 seconds; child lock symbol is displayed. For unlocking, press again the two buttons. 3-11 3.6.4 Function “Temp.”...
  • Page 12: 4-Programmes

    4-Programmes Detergent compartment for: Disinfector Liquid detergent Softener, Conditioning agent etc. Powder detergent • Yes, Optional, º Max. Tempera- Preset Function load ture Spin speed Programme Recommended in °C clothing type in rpm in kg max Preset Mixed-laundry of º º...
  • Page 13: 5-Daily Use

    5-Daily use 5.1 Power supply Connect the washing machine to a power supply (230V /60Hz; Fig. 5-1). Please refer also to section “Installation”. 5.2 Water connection Before connecting check the cleanliness and clar- ity of the water inlet. Turn on the tap (Fig.5-2). Note: Tightness Before use check for leakage in the joints between the tap and the inlet hose by turning on the tap.
  • Page 14 5-Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C Washable up to 30°C...
  • Page 15 5-Daily use 5.5 Selecting detergent Washing efficiency and performance is determined by the using detergent quality. Use only machine wash approved detergent. If needed, use specific detergents,e.g. for synthetic and woolen fabric. Always follow detergent manufacturer’s recommendations. Do not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent Kind of detergent Universal...
  • Page 16 5.7 Switch on the appliance Press the “Power” button for two seconds to switch on the appliance (Fig. 5-5). HWD120-B14876 5.8 Select a programme To get the best washing results, select a programme which fits the degree of soiling and sort of laundry type.
  • Page 17 5-Daily use 5.10 Start wash programme Press “Start/Pause” button (Fig. 5-8) to start; appli- ance operates according to present settings. Changes are only possible by cancelling the programme. 5.11 Interrupt/cancel wash programme To interrupt a running programme press gently “Start/Pause”. Programme run-time is flashing.
  • Page 18: 6-Eco-Friendly Washing

    6-Eco-friendly washing Environmentally responsible use To achieve best use of energy, water, detergent and time you should use the recommended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Quick Wash programme. Apply exact dosages of each washing agent.
  • Page 19: 7-Care And Cleaning

    7-Care and cleaning 7.1 Cleaning the detergent drawer T ake always care there are no detergent residues. Clean the drawer regular ly (Fig. 7-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3.
  • Page 20 7-Care and cleaning 7.5 Long periods of disuse If the appliance is left idle for a long period: 1. Pull out the electrical plug (Fig. 7-6). Turn off water supply (Fig. 7-7). 3. Open the door to prevent formation of moisture and odours.
  • Page 21 7-Care and cleaning Carefully clean pump filter,e.g. using running water 7-14 7-15 (Fig. 7-14). Refix it thoroughly (Fig. 7-15). 11. Close service flap. CAUTION! Pump filter sealing has to be clean and unhurt.If the lid is not full tightened,water can escape. The filter must be in place, or it may lead to leakage.
  • Page 22: 8-Troubleshooting

    8-Troubleshooting Many occuring problems could be solved by yourself without specific expertise.In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See “Customer service”. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
  • Page 23 8-T roubleshooting 8.2 Troubleshooting with display code Problem Cause Solution Drainage error, water is not fully Clean pump filter. Check drain hose installation. drained Lock - error. Shut the door properly. Temperature sensor - error. Contact the After sales service. Water level not reached after 8 Make sure that tap is fully opened and minutes at the lasted.
  • Page 24 8-Troubleshooting 8.3 Troubleshooting without display code Problem Cause Solution Washing machine Programme is not yet started. Check programme and start it. fails to operate. Door is not properly closed. Close the door properly. Machine has not been switched on. Switch the machine on. Power failure.
  • Page 25 8-Troubleshooting Problem Cause Solution Unsatisfactory Degree of pollution does not agree Select another programme. washing result. with selected programme. Choose the detergent acc.to Detergent quantitiy was not suf- the degree of pollution and acc. ficient. to manufacturer specifications. Maximum load has been exceeded. Reduce loading.
  • Page 26: 9-Installation

    9-Installation 9.1 Preparation Take the appliance out of the packaging. Remove all packaging material including protecting film on cabinet,polystyrene base,keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and porthole. This normal phenonmenon results from water tests in the factory.
  • Page 27 9-Installation 2. Remove 10screws (R1-R10) from back reinforcement (Fig. 9-6) and put aside. R5-R10 R1-R4 3. Pull out the 2 iron bars I1 and I2 (Fig. 9-7). 4. Fill the 6 left holes with blanking plugs (Fig. 9-8). Note: Keep in safe place Keep all parts of the transport protection in a safe place for later use.
  • Page 28 9-Installation 9.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain hose fixed to the clip at the appliance back. WARNING! Use only the supplied hose set for the connection.
  • Page 29 9-Installation 9.7 Fresh Water Connection Make sure that the gaskets are inserted. 9-14 9-13 1. Connect the water inlet hose with the angledend to the appliance(Fig.9-13). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4 thread (Fig.9-14).
  • Page 30: 10-Technical Data

    10-Technical data Technical data Model HWD120-B14876 Dimension (HxWxD in mm) 850x595x600 Power supply 230V/60Hz Current in A Max power in W 1800 Water pressure in MPa 0.03≤P ≤1 Net weight in kg...
  • Page 32 0020506943LQ...

Table of Contents