Table of Contents
CLOCK TIME
When you have finished adjusting the
setting,
➮
press the MENU button 7.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮
press the MENU button 7.
"MENU" appears in the display.
➮
Press the
or
edly until "CLOCK OFF" or
"CLOCK ON" appears in the dis-
play.
➮
Press the
or
switch between the ON/OFF set-
tings.
When you have finished adjusting the
setting,
➮
press the MENU button 7.
Briefly displaying the time when
the device is switched off
To display the time briefly when the de-
vice is off,
➮
DIS button :.
press the
The clock time is shown in the display
for approx. 8 seconds.
60
button 6 repeat-
button 6 to
Sound
You can adjust the sound settings (bass
and treble) separately for each source
(radio, CD/MP3 and CD changer / AUX).
You can boost or cut the bass and tre-
ble in steps of ± 7.
You can choose from 4 possible centre
frequencies in order to further optimise
the sound.
The change to the boost or cut of the
bass and treble relates to the particular
centre frequency that you selected.
The volume distribution settings (bal-
ance and fader) apply to all the audio
sources (except for traffic announce-
ments).
You can only adjust the balance and
fader settings for traffic announcements
whilst a traffic announcement is actu-
ally being played.
Adjusting the bass
Adjusting the bass boost/cut
➮
Press the AUDIO button 5.
"BASS" appears in the display.
➮
Press the
or
just the bass.
Setting the bass centre frequency
You can choose between 4 centre fre-
quencies for boosting/cutting the bass:
60 Hz, 80 Hz, 100 Hz and 120 Hz.
➮
Whilst the bass setting is being dis-
played, press the
to choose between the 4 possible
centre frequencies.
SOUND
button 6 to ad-
button 6
or
- Quick Links:
- Installation
Hide quick links:
Table of Contents
