Page 4
button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS con- venience function on/off (radio data system). Selects variable radio texts. BND button (band), source se- lection for radio mode, selection of FM memory levels and the wavebands MW and LW TS, starts the Travelstore func-...
CDC A 02, CDC A 08 and IDC A 09. The Blaupunkt CDC A08 CD changer is included with the Alaska DJ52. Compact Drive MP3 As an alternative to a CD changer, you can connect a Compact Drive MP3 to access MP3 music tracks.
The car radio provides connections for connecting external amplifiers and a subwoofer. We recommend you use well-matched products from the Blaupunkt or Velocity product ranges. Interface for vehicle-specific display and steering-wheel remote control Some vehicles are already fitted at the factory with a display in the dashboard and a steering-wheel remote control.
FLIP/RELEASE PANEL button 1. Press the This unlatches the flip/release panel. First pull the flip/release panel straight and then to the left out of the unit. After removing the flip/release pan- el, the unit switches itself off. All the current settings are saved. If there is a cassette in the unit, it remains there.
For this, you need adapter cable Blaupunkt no. 7 607 001 503. To find out which navigation systems are compatible with your car radio, please consult your Blaupunkt dealer.
VOLUME ADJUSTMENT buttons : to set the Use the desired volume. When you have completed the set- tings, press either the MENU but- ton 8 or OK ;. Note: You can adjust the volume for telephone conversations and voice output while they are being heard by using the vol- ume control 2.
RADIO MODE RDS function (AF, REG) The RDS functions AF (Alternative Fre- quency) and REG (Regional) extend your radio's range of functions. AF: If this RDS function is activat- ed, the unit automatically tunes into the best receivable frequency for the station that is currently set.
Browsing through broadcasting networks (only FM) If a radio station provides several pro- grammes, you have the option of brows- ing through its so-called “broadcasting network”. button : to Press the move to the next station on the broadcasting network. Note: If you want to use this feature, the RDS function must first be activated.
RADIO MODE Scanning receivable stations (SCAN) You can briefly listen in to all receivable stations. The scanning time can be set in the menu at between 5 and 30 sec- onds. Starting SCAN Hold down the OK button ; for more than two seconds.
Switching PTY on/off Press the MENU button 8. button : repeat- Press the edly until “PTY ON” or “PTY OFF” appears on the display. button : to Press the switch PTY on (ON) or off (OFF). When PTY is activated, PTY lights up on the display.
RADIO MODE Interference-related waveband change (SHARX) With the SHARX function you can elim- inate interference from neighbouring stations almost completely (FM). Acti- vate the SHARX function in an area of high transmitter density. Switching SHARX on/off Press the MENU button 8. button : repeatedly Press the until “SHARX”...
Traffic information Your car radio is equipped with an RDS- EON reception system. EON stands for Enhanced Other Network. When a traffic announcement (TA) is broadcast, your unit will automatically switch, within a broadcasting network, from a station which does not transmit traffic information to one that does.
CASSETTE MODE Cassette Operation Cassette Play If there is no cassette in the device button 9. Press the The flip-release panel opens. Insert the cassette into the cassette slot with the open side to the right. Close the control unit. “SDA SYNC”...
“REPEAT OFF” appears briefly in the display. Play continues as normal. RPT disap- pears from the display. Sampling All the Tracks on a Cassette (SCAN) Hold down the OK button ; for longer than two seconds. “SCAN” appears in the display. Sam- ples from all the tracks on the tape are played in ascending order.
CASSETTE MODE Skipping Blank Tape You can automatically skip sections of blank tape that last longer than 10 sec- onds. This requires the blank skip func- tion to be activated. Note: The blank skip can only be set if a cassette is being played.
CD changer mode Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions accompanying your CD changer. Starting CD changer mode Press the SRC button @ repeat- edly until “CHANGER” appears on the display.
CD CHANGER MODE To play the tracks of all the inserted CDs in random order, press the button 5 MIX > once again. “MIX ALL” appears briefly on the dis- play and MIX lights up. Stopping MIX Press the button 5 MIX > until “MIX OFF”...
CD CHANGER MODE buttons : to select Use the “CDC NAME”. button :. Press the Hold down the MENU button 8. A beep sounds at the end of four seconds and “DELETE NAME” ap- pears on the display. Release the MENU button 8. The CD name is now deleted.
CLOCK - TIME The time appears on the display. The minutes flash and can now be set. Set the minutes using the tons :. Once the minutes have been set, button :. The hours press the now flash. Set the hours using the tons :.
Setting the X-BASS X-BASS means that the bass is raised to a comfortable level at lower volume levels. You can adjust the X-BASS func- tion individually for all audio sources. When X-BASS is activated, the X-BASS symbol lights up on the display. Press the AUDIO button =.
EQUALIZER Equalizer This car radio is fitted with three para- metric digital equalizers, which can be set individually. This means you have the means to save and request differ- ent equalizer settings for different situ- ations (eg only driver, driver and front passenger or vehicle occupants in front and back).
Setting the equalizer Press the DEQ button <. Select “DIGITAL EQ” using the button :. Select the equalizer “USER EQ1”, “USER EQ2” or “USER EQ3”, which you would like to set by pressing the or the Select the filter using the button :.
EQUALIZER Setting aid for the equalizer Commence settings at mid and treble section and complete them in the bass section. Sound impression/problem Bass reproduction too weak Impure bass Booming Disagreeable pressure Sound very dominant, aggressive, no stereo effect Muffled reproduction Low transparency No instrumental brilliance What to do...
Your car radio has one TMC output for connection to Blaupunkt navigation systems. Your Blaupunkt dealer will tell you which nav- igation systems can be used with your car radio. When a navigation system is connect- ed and a TMC station received, “TMC”...
TECHNICAL DATA Technical data Amplifier Output power: 4 x 26 watts sine in accordance with DIN 45 324 at 14.4V, 4 x 50 watts max. power Tuner Frequency ranges: FM : 87.5 - 108 MHz MW : 531 - 1 602 kHz LW : 153 - 279 kHz FM transmission range:...