Related Manuals for GE IC755ACC07ADP
Summary of Contents for GE IC755ACC07ADP
- Page 1 Intelligent Platforms Operator Interface Products QuickPanel 7” Display Adapter Kit IC755ACC07ADP Installation Guide, GFK-2895A October 2014...
- Page 2 The assembly is then inserted into the 8” cutout in the customer panel. Note: For user manuals, product updates, and other information, go to the Support website http://www.ge-ip.com/support and refer to Operator Interfaces and PC. IC755ACC07ADP Installation Guide GFK-2895A...
- Page 3 1.1 Functional Compatibility The adapter kit can be used with the following QuickPanel 7” Display units: Part Number Description IC755CxW07CDx QuickPanel 7” Display 1.2 Adapter Kit Contents Component Plastic adapter assembly (with attached gasket) Mounting clamps Slotted screws GFK-2895A IC755ACC07ADP Installation Guide...
- Page 4 The following figure displays the QuickPanel 7” Display and adapter kit assembly properly installed into a customer panel. Mounting bracket (Qty 4) Slotted screw (Qty 8) QuickPanel Display Adapter Customer panel Assembly Installed in Customer Panel (Side View) IC755ACC07ADP Installation Guide GFK-2895A...
-
Page 5: Panel Cutout Dimensions
1.4 Panel Cutout Dimensions The QuickPanel 7” Display adapter kit requires the panel cutout dimensions displayed in the following figure. Adapter 227.84 mm (8.97 in) Adapter Kit in Customer Panel (Rear View) GFK-2895A IC755ACC07ADP Installation Guide... -
Page 6: Installation
7” Display into the adapter/gasket assembly until the side snaps click into the display housing. Maintain the orientation of the display in relation to the adapter to ensure proper clearance around display ports and cooling vents. IC755ACC07ADP Installation Guide GFK-2895A... - Page 7 Adapter/Gasket Assembly with Side Snaps Adjust the mounting bracket screw so the bottom guide on the screw contacts the bottom surface of the metal bracket body. The guide assists with mounting bracket insertion. Bracket body Guide Mounting Bracket Guide GFK-2895A IC755ACC07ADP Installation Guide...
- Page 8 7” Display. Use the display housing slots and the round adapter recesses to locate each of the brackets. Adapter recess Display housing slot Display Housing Slot and Adapter Recess Mounting bracket (Qty 4) Installed Mounting Bracket IC755ACC07ADP Installation Guide GFK-2895A...
- Page 9 Installed Mounting Bracket (Close-up) Using a #2 Phillips screwdriver, torque each screw to a maximum of 0.11 to 0.23 Nm (1 to 2 in-lb). GFK-2895A IC755ACC07ADP Installation Guide...
- Page 10 Insert the QuickPanel 7” Display adapter assembly into the cutout panel as displayed in the following figure. The gasket on the assembly should touch the panel’s front surface once it is fully inserted. Inserting Assembly in Panel IC755ACC07ADP Installation Guide GFK-2895A...
- Page 11 SD, MIC, and such ports on the left, and the COM, +24 V power, LAN, and such ports on the bottom. Installed Assembly Rear View Installed Assembly Underside Rear View GFK-2895A IC755ACC07ADP Installation Guide...
- Page 12 Slotted screws (Qty 2 per clamp) Mounting Clamp Run the screws into the PEM inserts until the taper on the screw head contacts the insert. This promotes clearance between the screw and the panel. PEM Insert with Screw IC755ACC07ADP Installation Guide GFK-2895A...
- Page 13 Using the provided slots, insert the four mounting clamp assemblies into the adapter. Insert the hooks of each mounting clamp into the adapter openings as displayed in the following figures. Inserting Mounting Clamps into Adapter Mounting Clamp Hooks GFK-2895A IC755ACC07ADP Installation Guide...
- Page 14 Reconnect any cables that were removed in step 1 of this procedure. If an SD card was removed, install it in the SD port. IC755ACC07ADP Installation Guide GFK-2895A...
- Page 15 GE Intelligent Platforms Contact Information Americas: 1-800-433-2682 or 1-434-978-5100 Global regional phone numbers are available at www.ge-ip.com. ©2014 GE Intelligent Platforms, Inc. All Rights Reserved *Trademark of GE Intelligent Platforms, Inc. All other brands or names are property of their respective holders.