Load The Measuring Cycle Support; Assigning Calls And Measuring Cycles - Siemens SINUMERIK 840D sl Programming Manual
Measuring cycles
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
7.2.2
Load the measuring cycle support
Function
The files mcsupp_1.com and mcsupp_2.com are loaded from diskette or via RS-232-C with
"Data in" into the "Services" menu.
With the MMC 102/103 the auxiliary cycle programs (see list Subsection "Assigning calls and
measuring cycles") must be transferred to the NCU with "Load".
The Power ON is executed.
7.2.3
Assigning calls and measuring cycles
Function
The following table provides an overview of:
• Measurement task
• Measuring cycle
• Start
Measuring task, function
Auxiliary parameters
Calibrating tool probes
Calibrate workpiece probe on surface
Calibrate workpiece probe in reference groove
Calibrate workpiece probe in hole
Measure milling tool on milling machines
Measure turning tool
Measure hole/shaft parallel to axis/at an angle
Measure groove/web parallel to axis/at an angle
Measure rectangle inside/outside parallel to axis
Single-point measurement milling machine
Angle measurement
Measure corner, specifying angles
Measure corner, specifying points
Single-point measurement turning
Two-point measurement
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
7.2 Measuring cycle support in the program editor (up to measuring cycles SW 5.4)
Miscellaneous functions
Measuring
Call in the program
cycle
-
CYCLE_PARA(...)
CYCLE971,
CYCLE_CAL_TOOLSETTER(...)
CYCLE972,
CYCLE982
CYCLE973,
CYCLE_CAL_PROBE(...)
CYCLE976
CYCLE973
CYCLE_973(...)
CYCLE976
CYCLE_976(...)
CYCLE971
CYCLE_971(...)
CYCLE972
CYCLE_972(...)
CYCLE977,
CYCLE_977_979A(...)
CYCLE979
CYCLE977,
CYCLE_977_979B(...)
CYCLE979
CYCLE977
CYCLE_977_979C(...)
CYCLE978
CYCLE_978(...)
CYCLE998
CYCLE_998(...)
CYCLE961
CYCLE_961_W
CYCLE961
CYCLE_961_P
CYCLE974
CYCLE_974(...)
CYCLE994
CYCLE_994(...)
7-13
Table of Contents
