Ethernet Port; Wi-Fi™ Channel - Safran MorphoAccess SIGMA Series Administration Manual
Hide thumbs
Also See for MorphoAccess SIGMA Series:
- Quick user manual (33 pages) ,
- Installation manual (81 pages) ,
- Administration manual (478 pages)
Table of Contents
MorphoAccess® SIGMA Series - Administrator Guide
Compatibility with an Access Control System
Ethernet port
Protocol selection
The administrator can configure the terminal to send the access control result messages via an
Ethernet link. The protocol could be one of UDP/TCP and TLS/SSL.
MorphoAccess® SIGMA Family terminal is able to send message to two different distant system:
one preferred host (host # 1) and one alternative host (host #2).
Parameter name
remote_msg_ip_conf.host_1_
protocol
or
remote_msg_ip_conf.host_2_
protocol
For details on configuration of other parameters that help in managing the process of sending
remote message to access controller, please refer to MorphoAccess® 5G Series – Parameters
Guide.
For details about SSL protocol, please refer to SSL Solution for MorphoAccess® document.
Wi-Fi™ Channel
The administrator can configure the terminal to send the access control result messages via a
wireless Wi-Fi™ b/g connection, instead of Ethernet connection. Please refer to
Network Configuration
The message format and the protocols supported are the same as for the Ethernet channel:
UDP, or TCP or SSL.
WARNING: The terminal cannot be connected through Ethernet and through Wi-Fi™,
simultaneously.
2017_2000025464-v03
July 17
Value
0, 1 or 2
Wi-Fi™ Network Configuration" section for more information.
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
Description
The administrator can set a protocol type that
will be used for communicating with remote
controller host 1, by using this parameter.
Set to "0", for using TCP protocol for
communication
Set to "1", for using UDP protocol for
communication
Set to "2", for using TLS/SSL over TCP for
communication
"Wi-Fi™
474
Table of Contents
