Analogue Out Menu - Honeywell X Series User Manual
Hide thumbs
Also See for X Series:
- Installation instruction sheet (11 pages) ,
- Installation instruction (5 pages) ,
- Manual (8 pages)
Table of Contents
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
If the recorder is set to Active, select Passive and Commit the change. Then return to the
menu and select Active and Commit the change.
(Not available for the eZtrend QXe recorder).
(Main Menu > Configure > Setup > Edit Setup> Field IO > Analogue Out)
Only available when an Analogue Out card is fitted as an option, 2 or 4 outputs are available
per card.
The outputs are factory calibrated to meet the published specification and cannot be field
calibrated.
Refer to connection details and
43-TV-25-30 Iss.6 GLO Aug 07 UK
• Eng. Span - (Ohms, Volts and Amps only). Only available when not using "Use Pen
Scale" option. This is the highest value of the engineering range and corresponds to the
top of the input range. Select and enter a value using the on-screen keyboard.
• Eng. Zero - (Ohms, Volts and Amps only). Only available when not using "Use Pen
Scale" option. This is the bottom of the engineering scale and represents the bottom of
the input scale. Select and enter a value using the on-screen keyboard.
• Demo Setup - Only available if there is no Analogue Input card fitted. Examples of var-
ious inputs are available without having an actual signal input coming into the recorder.
• • Demo Type - Select this for a list of available Demo Type inputs.
• • Cycle Time - Enter the Cycle Time, in seconds, of the Demo Input. Select and
use the on-screen keyboard.
• • Add Noise - This is to Add Noise to the Demo Input as a percentage value.
Select and use the on-screen keyboard.
*Thermocouple Wiring Changes.
Analogue Out Menu
"Analogue Output Channel Numbers" on page 22
Menu path to current menu
The Analogue Out screen
displays all the available
Analogue Output channels.
Each channel displays its
individual settings.
Select a numbered channel
to edit the configuration of
each output
57
Table of Contents
