Table of Contents
4.2 S1 469 SETUP
S INSTALLATION
S [ENTER] for more
These commands clear various informative and historical data when the 469 is first applied on a new installa-
tion.
RESET MOTOR INFORMATION: Counters for number of motor starts and number of emergency restarts can be
viewed in actual values. The 469 also learns various motor characteristics through motor operation. These
learned parameters include acceleration time, starting current, and starting thermal capacity. Total motor run-
ning hours may also be viewed in actual values. On a new installation or if new equipment is installed, all this
information can be reset with this setpoint.
RESET STARTER INFORMATION: The total number of starter operations can be viewed in actual values. On a new
installation or if maintenance work is done on the breaker or contactor, this accumulator can be cleared with
4
this setpoint.
4-10
ð
RESET MOTOR
ENTER
INFORMATION: No
ESCAPE
RESET STARTER
ESCAPE
INFORMATION: No
MESSAGE
469 Motor Management Relay
4 SETPOINT PROGRAMMING
Range: No, Yes
Range: No, Yes
4.2.8 INSTALLATION
GE Power Management
Table of Contents
