Displaying/Deleting Sdb - Siemens SIMATIC S7-300 Manual
Fm 354 servo drive positioning module
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Reference manual (574 pages) ,
- Installation and operating manual (356 pages)
Table of Contents
Display/delete
SDB in the S7
project
Fig. 5-9
Loading the SDB
When you have created the SDB, you must load the "system data" of the
in the CPU
project into the CPU.
There are two ways of proceeding:
1. Method
2. method
You can also program the memory card for the CPU on a programming de-
vice/PC.
If the configuration is loaded from HW-CONFIG, this SDB is not loaded into
the CPU.
FM 354 Servo Drive Positioning Module
Select menu File Display SDB
All SDBs for FM 354 of the project are
displayed
Delete SDB?
Select SDB and delete
Displaying/deleting SDB
Select the online window in the SIMATIC Manager (the online and offline
windows must be open)
Copy the system data from the offline project in CPU\S7-Pro-
gram\blocks\system data into the online project (drag with the mouse or
select Copy/Paste).
Select the system data in the SIMATIC Manager in CPU\S7-Pro-
gram\blocks\system data.
Activate the menu Target system Load (or the right mouse button) to
load the system data into the CPU
or
Use the menu Target system Load in EPROM memory card on CPU
Defining Parameters of the FM 354
No
Close the win-
dow
Yes
1 000
5-27
- Quick Links:
- Table of Contents
- Troubleshooting
- Troubleshooting
Hide quick links:
Table of Contents
Troubleshooting
