Section 4
Using the HMI
4.1.12.2
4.1.12.3
44
For parameters with defined steps, digits smaller than the step
value cannot be edited.
3.
Press
or
to move the cursor to another digit.
4.
To select the minimum or maximum value, select the arrow symbol in front of
the value.
•
To set the value to the maximum, press
•
To set the value to the minimum, press
After pressing
, the previous value can be restored by pressing
vice versa. Another press of
The symbol in front of the value is ↕, when the previous value is shown.
A071204 V3 EN
Figure 26:
Restoring the previous value
Editing string values
1.
Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
or
to change the value of an active character.
One press changes the value by one step.
3.
Press
or
to move the cursor to another character.
•
To insert characters or space, press simultaneously
•
To delete characters, press simultaneously
Editing enumerated values
1.
Activate the setting mode and select a setting.
.
.
or
sets the value to the lower or higher limit.
and
1MRS756509 E
once, and
and
.
.
630 series
Operation Manual