Bridge Configuration - GE MDS Mercury Series Reference Manual
Wireless ip/ethernet transceiver, covering ap and remote units
Hide thumbs
Also See for MDS Mercury Series:
- Setup manual (4 pages) ,
- Setup manual (4 pages) ,
- Reference manual (76 pages)
Table of Contents
52
•
Ethernet Filtering Config
specifying of Ethernet addresses.
Ethernet Filtering Configuration Menu
Figure 3-20. Ethernet Filtering Configuration Menu
•
Enable Filtering
[
enabled, disabled; disabled
•
Address 1, 2, 3, 4
enabled, the Mercury only accepts traffic on its Ethernet port
from the configured addresses.
[
Valid IP address string
3.4.3 Bridge Configuration
Figure 3-21. Bridge Configuration Menu
•
—View/set the priority of the bridge in the span-
Bridge Priority
ning tree. [
0-65535; 32769
Mercury Reference Manual
—Allows enabling/disabling filtering and
Invisible place holder
—Activates Ethernet filtering.
]
—Ethernet address fields. When filtering is
]
Invisible place holder
]
05-4446A01, Rev. C
Chapters
Table of Contents
Troubleshooting
