Page 1
HDMI Over IP-PRO DSX PRO DSX - HDMI Over IP Network Switch Configuration For DLINK DGS 1210-28p Revision: 1.1 Octava Inc.-7078 Peachtree Ind. Blvd Suite 300 All prices and specifications are subject to change without notice. Norcross, Ga. 30071 All trademarks are the sole property of their respective companies.
Page 2
System Application Diagram Customizable Matrix Control App ( available for iOS, and Android Devices)
Page 3
Introduction: Scope: This guide provides a reference for configuring your network switch to work with the Octava PRO DSX HDMI Over IP Matrix System. This configuration guide is based on the DLINK DGS1210-28P In this guide we will configure the network switch so some of the advanced features are enabled: Jumbo frame : jumbo frames are Ethernet frames with more than 1500 bytes of payload.
Page 4
1. Connect a LAN cable directly from you PC to the network switch. 2. Set your computer network settings to : IP Address: 10.0.0.2 Subnet : 255.0.0.0 Gateway: 10.0.0.1 3. Open a browser and enter the IP address of the DLINK: 10.90.90.90...
Page 5
4. Select Standard mode and Exit 5. Select VLAN...
Page 6
6. Select 802.1Q VLAN 7. Select all ports and set as Untagged 8 . Select L2 Functions. Set JUMBO Frame = Enable...
Page 7
9 . Go to Multicast and set as follows: Set IGMP Snooping = Enable Host Time Out = 260 Robustness Variable = 2 Query Interval= 125 Router Timeout = 125 Last Member Query Interval = 1 Max Response Time = 10...
Page 8
10. Goto / Multicast / IGMP Snooping State = Enabled Querier State = Enabled Fast Leave = Enabled 11. Set port 28 as Static Router Port . Leave other ports unselected...
Page 9
12. Goto Multicast / Multicast Filtering Mode Set Filtering mode = Forward Unregistered Groups 13. Save 14. Reboot Device...